SN74ALVCH16524DLR集成电路（IC）的通用总线功能规格书PDF中文资料

SN74ALVCH16524DLR属于集成电路（IC）的通用总线功能。由德州仪器制造生产的SN74ALVCH16524DLR通用总线功能通用总线功能系列产品是元件级产品，用于处理或操作一系列（通常为 8 个或更多）并行逻辑信号（称为总线）。所执行的功能包括临时存储要发送或接收的数据，执行缓冲以允许输出电流容量有限的器件（例如微处理器）通过远距离互连高速传输数据，以及调换或移动总线内的位顺序等。

FEATURES

· Member of the Texas Instruments Widebus™

Family

· UBT™ Transceiver Combines D-Type Latches

and D-Type Flip-Flops for Operation in

Transparent, Latched, Clocked, or

Clock-Enable Mode

· Operates From 1.65 V to 3.6 V

· Max tpd of 3.2 ns at 3.3 V

· ±24-mA Output Drive at 3.3 V

· Bus Hold on Data Inputs Eliminates the Need

for External Pullup/Pulldown Resistors

· Latch-Up Performance Exceeds 250 mA Per

JESD 17

· ESD Performance Tested Per JESD 22

– 2000-V Human-Body Model (A114-A)

– 200-V Machine Model (A115-A)

DESCRIPTION/ORDERING INFORMATION

This 18-bit universal bus transceiver is designed for

1.65-V to 3.6-V VCC operation.

Data flow in each direction is controlled by

output-enable (OEAB and OEBA) and clock-enable

(CLKENBA) inputs. For the A-to-B data flow, the data

flows through a single buffer. The B-to-A data can

flow through a four-stage pipeline register path, or

through a single register path, depending on the state

of the select (SEL) input.

Data is stored in the internal registers on the

low-to-high transition of the clock (CLK) input,

provided that the appropriate CLKENBA input is low.

The B-to-A data transfer is synchronized with CLK.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors

with the bus-hold circuitry is not recommended.