SN74ALVC16835DLR集成电路（IC）的通用总线功能规格书PDF中文资料

SN74ALVC16835DLR属于集成电路（IC）的通用总线功能。由美国德州仪器公司制造生产的SN74ALVC16835DLR通用总线功能通用总线功能系列产品是元件级产品，用于处理或操作一系列（通常为 8 个或更多）并行逻辑信号（称为总线）。所执行的功能包括临时存储要发送或接收的数据，执行缓冲以允许输出电流容量有限的器件（例如微处理器）通过远距离互连高速传输数据，以及调换或移动总线内的位顺序等。

FEATURES

· Member of the Texas Instruments Widebus™

Family

· Operates From 1.65 V to 3.6 V

· Max tpd of 2 ns at 3.3 V

· ±24-mA Output Drive at 3.3 V

· Ideal for Use in PC100 Register DIMM,

Revision 1.1

· Latch-Up Performance Exceeds 250 mA Per

JESD 17

· ESD Protection Exceeds JESD 22

- 2000-V Human-Body Model (A114-A)

- 200-V Machine Model (A115-A)

- 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

This 18-bit universal bus driver is designed for 1.65-V

to 3.6-V VCC operation.

Data flow from A to Y is controlled by the

output-enable (OE) input. The device operates in the

transparent mode when the latch-enable (LE) input is

high. The A data is latched if the clock (CLK) input is

held at a high or low logic level. If LE is low, the A

data is stored in the latch/flip-flop on the low-to-high

transition of CLK. When OE is high, the outputs are in

the high-impedance state.

To ensure the high-impedance state during power up

or power down, OE should be tied to VCC through a

pullup resistor; the minimum value of the resistor is

determined by the current-sinking capability of the

driver.