SN74AHCT244MDWREP集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

SN74AHCT244MDWREP属于集成电路（IC）的缓冲器驱动器接收器收发器。由美国德州仪器公司制造生产的SN74AHCT244MDWREP缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

Controlled Baseline

– One Assembly/Test Site, One Fabrication

Site

Extended Temperature Performance of

–55°C to 125°C

Enhanced Diminishing Manufacturing

Sources (DMS) Support

Enhanced Product-Change Notification

Qualification Pedigree†

EPIC (Enhanced-Performance Implanted

CMOS) Process

Inputs Are TTL-Voltage Compatible

Latch-Up Performance Exceeds 250 mA Per

JESD 17

ESD Protection Exceeds 1000 V Per

MIL-STD-833, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

description/ordering information

This octal buffer/driver is designed specifically to improve both the performance and density of 3-state

memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.

The SN74AHCT244 is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs.

When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are

in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.