SN74ACT573-Q1 Automotive Octal D-Type Transparent Latches With 3-State Outputs

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5 V to 6 V • Inputs accept volta

文件：1.62006 Mbytes 页数：28 Pages

TI

德州仪器

SNx4ACT573 Octal D-Type Transparent Latches With 3-State Outputs

1 Features • Operation of 4.5V to 5.5V VCC • Inputs accept voltages to 5.5V • Maximum tpd of 9.5ns at 5V • Inputs are TTL-voltage compatible 2 Applications • Parallel data storage • Digital bus buffer 3 Description These 8-bit latches feature 3-state outputs designed specifically for

文件：2.69279 Mbytes 页数：36 Pages

TI

德州仪器

SN74ACT573-Q1 Automotive Octal D-Type Transparent Latches With 3-State Outputs

1 Applications • Parallel data storage • Digital bus buffer 2 Description These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports,

文件：1.59024 Mbytes 页数：24 Pages

TI

德州仪器

SN74ACT573-Q1 Automotive Octal D-Type Transparent Latches With 3-State Outputs

1 Features • Operation of 4.5V to 5.5V VCC • Inputs accept voltages to 5.5V • Maximum tpd of 9.5ns at 5V • Inputs are TTL-voltage compatible 2 Applications • Parallel data storage • Digital bus buffer 3 Description These 8-bit latches feature 3-state outputs designed specifically for

文件：1.70027 Mbytes 页数：29 Pages

TI

德州仪器

具有三态输出的汽车级八路 5V D 型透明锁存器

这些 8 位锁存器具有专门设计用于驱动高电容或相对低阻抗负载的三态输出。这些器件特别适用于实现缓冲寄存器、I/O 端口、总线驱动器和工作寄存器。 • 符合面向汽车应用的 AEC-Q100 标准： \n• 器件温度等级 1：-40°C 至 +125°C\n• 器件 HBM ESD 分类等级 2\n• 器件 CDM ESD 分类等级 C4B\n \n• 采用具有可湿性侧面的 QFN 封装\n• 1.5V 至 6V 的宽工作电压范围\n• 输入电压高达 6V\n• 电压为 5V 时，输出驱动持续保持 ±24mA\n• 电压为 5V 时，支持高达 ±75mA 的 输出驱动（短时突发）\n• 驱动 50Ω 传输线路\n• 电压为 5V 且负载为 50pF 时的最大 t pd 为 10.6ns;

TI

德州仪器

SN74ACT573-Q1 Automotive Octal D-Type Transparent Latches With 3-State Outputs

1 Applications • Parallel data storage • Digital bus buffer 2 Description These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports,

文件：1.59024 Mbytes 页数：24 Pages

TI

德州仪器

SN74ACT573-Q1 Automotive Octal D-Type Transparent Latches With 3-State Outputs

1 Features • Operation of 4.5V to 5.5V VCC • Inputs accept voltages to 5.5V • Maximum tpd of 9.5ns at 5V • Inputs are TTL-voltage compatible 2 Applications • Parallel data storage • Digital bus buffer 3 Description These 8-bit latches feature 3-state outputs designed specifically for

文件：1.70027 Mbytes 页数：29 Pages

TI

德州仪器