SN74ACT1073集成电路（IC）的专用逻辑器件规格书PDF中文资料

SN74ACT1073属于集成电路（IC）的专用逻辑器件。由德州仪器制造生产的SN74ACT1073专用逻辑器件专用逻辑 IC 设计提供应用特定的逻辑输出类型，例如 BCD 速率倍增、可寻址扫描端口、总线终端阵列、CML 驱动器、比较器、ABT 扫描测试、二进制全加法器、互补对加逆变器、可配置缓冲器、触点颤动消除器、晶体振荡器、延迟元件、差分接收器、LVTTL 到 GTLP 收发器、存储器解码器、电源良好检测器和分频器。

Designed to Ensure Defined Voltage Levels

on Floating Bus Lines in CMOS Systems

4.5-V to 5.5-V VCC Operation

Inputs Accept Voltages to 5.5 V

Reduces Undershoot and Overshoot

Caused By Line Reflections

Repetitive Peak Forward

Current . . . IFRM = 100 mA

Inputs Are TTL-Voltage Compatible

Low Power Consumption (Like CMOS)

Center-Pin VCC and GND Configuration

Minimizes High-Speed Switching Noise

ESD Protection Exceeds JESD 22

− 2000-V Human-Body Model (A114-A)

− 200-V Machine Model (A115-A)

description/ordering information

This device is designed to terminate bus lines in CMOS systems. The integrated low-impedance diodes clamp

the voltage of undershoots and overshoots caused by line reflections and ensure signal integrity. The device

also contains a bus-hold function that consists of a CMOS-buffer stage with a high-resistance feedback path

between its output and its input. The SN74ACT1073 prevents bus lines from floating without using pullup or

pulldown resistors.

The high-impedance inputs of these internal buffers are connected to the input terminals of the device. The

feedback path on each internal buffer stage keeps a bus line tied to the bus holder at the last valid logic state

generated by an active driver before the bus switches to the high-impedance state.