10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

Designed to Ensure Defined Voltage Levels on Floating Bus Lines in CMOS Systems Reduces Undershoot and Overshoot Caused By Line Reflections Repetitive Peak Forward Current . . . IFRM = 100 mA Inputs Are TTL-Voltage Compatible Low Power Consumption (Like CMOS) ESD Protection Exceeds 2000 V

文件：355.7 Kbytes 页数：11 Pages

TI

德州仪器

10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

文件：58.39 Kbytes 页数：5 Pages

TI

德州仪器

10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

文件：488.86 Kbytes 页数：11 Pages

TI

德州仪器

具有总线保持功能的 10 位总线终端网络

This device is designed to terminate bus lines in CMOS systems. The integrated low-impedance diodes clamp the voltage of undershoots and overshoots caused by line reflections and ensure signal integrity. The device also contains a bus-hold function that consists of a CMOS-buffer stage with a high-re • Designed to Ensure Defined Voltage Levels on Floating BusLines in CMOS Systems• Reduces Undershoot and Overshoot Caused By Line Reflections• Repetitive Peak Forward Current . . . IFRM = 100 mA• Inputs Are TTL-Voltage Compatible• Low Power Consumption (Like CMOS)• ESD Protection Exceeds 2000 V Per ;

TI

德州仪器

丝印：ACT1071；Package：SOIC；10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

Designed to Ensure Defined Voltage Levels on Floating Bus Lines in CMOS Systems Reduces Undershoot and Overshoot Caused By Line Reflections Repetitive Peak Forward Current . . . IFRM = 100 mA Inputs Are TTL-Voltage Compatible Low Power Consumption (Like CMOS) ESD Protection Exceeds 2000 V

文件：355.7 Kbytes 页数：11 Pages

TI

德州仪器

丝印：ACT1071；Package：SOIC；10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

Designed to Ensure Defined Voltage Levels on Floating Bus Lines in CMOS Systems Reduces Undershoot and Overshoot Caused By Line Reflections Repetitive Peak Forward Current . . . IFRM = 100 mA Inputs Are TTL-Voltage Compatible Low Power Consumption (Like CMOS) ESD Protection Exceeds 2000 V

文件：355.7 Kbytes 页数：11 Pages

TI

德州仪器

丝印：ACT1071；Package：SOIC；10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

Designed to Ensure Defined Voltage Levels on Floating Bus Lines in CMOS Systems Reduces Undershoot and Overshoot Caused By Line Reflections Repetitive Peak Forward Current . . . IFRM = 100 mA Inputs Are TTL-Voltage Compatible Low Power Consumption (Like CMOS) ESD Protection Exceeds 2000 V

文件：355.7 Kbytes 页数：11 Pages

TI

德州仪器

10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

文件：488.86 Kbytes 页数：11 Pages

TI

德州仪器

10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

文件：488.86 Kbytes 页数：11 Pages

TI

德州仪器

10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION

文件：58.39 Kbytes 页数：5 Pages

TI

德州仪器