SN74AC2G101 Dual Configurable Clock Flip-Flops With Clear

1 Features • Wide operating range of 1.5V to 6V • Inputs accept voltages up to 6V • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Maximum tpd of 11.3ns at 5V, 50pF load 2 Applications • Hold a signal durin

文件：2.15461 Mbytes 页数：29 Pages

TI

德州仪器

SN74AC2G101-Q1 Automotive Dual Configurable Clock Flip-Flops With Clear

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：2.092429 Mbytes 页数：35 Pages

TI

德州仪器

具有施密特触发输入、用于时钟输入信号的双通道可配置门

SN74AC2G101 包含两个具有上升沿触发可配置逻辑时钟、低电平有效清零功能和数据输入的独立 D 类触发器。时钟输入可被配置为支持多种单输入和双输入逻辑功能，包括缓冲器、反相器、与、或、与非、或非、异或、异或非。所有输入均采用施密特触发架构，以支持慢速或高噪声输入信号。 1.5V 至 6V 的宽工作电压范围\n \n输入电压高达 6V\n \n电压为 5V 时，为 ±24mA 的连续输出驱动\n \n电压为 5V 时，支持高达 ±75mA 的输出驱动（短时突发）\n \n驱动 50Ω 传输线\n \n电压为 5V 且负载为 50pF 时的最大 tpd 为 11.3ns;

TI

德州仪器

丝印：AC101Q；Package：TSSOP(PW)；SN74AC2G101-Q1 Automotive Dual Configurable Clock Flip-Flops With Clear

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：2.092429 Mbytes 页数：35 Pages

TI

德州仪器

SN74AC2G101-Q1 Automotive Dual Configurable Clock Flip-Flops With Clear

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：2.092429 Mbytes 页数：35 Pages

TI

德州仪器

丝印：AC101Q；Package：WQFN(BQB)；SN74AC2G101-Q1 Automotive Dual Configurable Clock Flip-Flops With Clear

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：2.092429 Mbytes 页数：35 Pages

TI

德州仪器

具有施密特触发输入、用于时钟输入信号的汽车级双通道可配置门

The SN74AC2G101-Q1 contains two independent D-type flip-flops with rising edge triggered configurable logic clock, active low clear, and data inputs. The clock inputs can be configured for many 1- and 2-input logic functions, including buffer, inverter, AND, OR, NAND, NOR, XOR, XNOR. All inputs have AEC-Q100 qualified for automotive applications: \n \nDevice temperature grade 1: -40°C to +125°C\n \nDevice HBM ESD classification level 2\n \nDevice CDM ESD classification level C4B\n \n\n \nAvailable in wettable flank QFN package\n \nWide operating range of 1.5V to 6V\n \nInputs accept voltages up;

TI

德州仪器