SN74AC165-Q1 Automotive 8-Bit Parallel Input Shift Register

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：1.69933 Mbytes 页数：30 Pages

TI

德州仪器

SN74AC165 8-Bit Parallel Input Shift Register

1 Features • Wide operating range of 1.5V to 6V • Inputs accept voltages up to 6V • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Maximum tpd of 10.1ns at 5V, 50pF load 2 Applications • Increase the number

文件：1.67079 Mbytes 页数：29 Pages

TI

德州仪器

SN74AC165-Q1 Automotive 8-Bit Parallel Input Shift Register

1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: -40°C to +125°C – Device HBM ESD classification level 2 – Device CDM ESD classification level C4B • Available in wettable flank QFN package • Wide operating range of 1.5V to 6V • Inputs accept voltage

文件：1.83664 Mbytes 页数：31 Pages

TI

德州仪器

SN74AC165 8-Bit Parallel Input Shift Register

1 Features • Wide operating range of 1.5V to 6V • Inputs accept voltages up to 6V • Continuous ±24mA output drive at 5V • Supports up to ±75mA output drive at 5V in short bursts • Drives 50Ω transmission lines • Maximum tpd of 10.1ns at 5V, 50pF load 2 Applications • Increase the number

文件：1.81057 Mbytes 页数：31 Pages

TI

德州仪器

汽车级 8 位 1.5V 至 6V 并联负载移位寄存器

SN74AC165-Q1 是一款 8 位并行负载移位寄存器，具有串行数据输入 (SER)、标准和反相串行输出（QH、QH）以及时钟抑制输入 (CLK INH)。 符合面向汽车应用的 AEC-Q100 标准： \n \n器件温度等级 1：-40°C 至 +125°C\n \n器件 HBM ESD 分类等级 2\n \n器件 CDM ESD 分类等级 C4B\n \n\n \n采用具有可湿性侧面的 QFN 封装\n \n1.5V 至 6V 的宽工作电压范围\n \n输入电压高达 6V\n \n电压为 5V 时，为 ±24mA 的连续输出驱动\n \n电压为 5V 时，支持高达 ±75mA 的输出驱动（短时突发）\n \n驱动 50Ω 传输线\n \n电压为 5V 且负载为 50pF 时的最大 tpd 为 10.1ns;

TI

德州仪器