SN74ABT640N集成电路（IC）的缓冲器驱动器接收器收发器规格书PDF中文资料

SN74ABT640N属于集成电路（IC）的缓冲器驱动器接收器收发器。由美国德州仪器公司制造生产的SN74ABT640N缓冲器，驱动器，接收器，收发器逻辑缓冲器、驱动器、接收器和收发器允许隔离对某个电路的逻辑信号的访问，以用于另一电路。缓冲器将其输入信号（不变或反相）传递到其输出，并可能用于清除弱信号或驱动负载。在布尔逻辑仿真器中，缓冲器主要用于增加传播延迟。逻辑接收器和收发器允许在数据总线之间进行隔离通信。

State-of-the-Art EPIC-IIBE BiCMOS Design

Significantly Reduces Power Dissipation

ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

Latch-Up Performance Exceeds 500 mA Per

JEDEC Standard JESD-17

Typical VOLP (Output Ground Bounce) < 1 V

at VCC = 5 V, TA = 25°C

High-Drive Outputs (–32-mA IOH,

64-mA IOL)

Package Options Include Plastic

Small-Outline (DW), Shrink Small-Outline

(DB), and Thin Shrink Small-Outline (PW)

Packages, Ceramic Chip Carriers (FK), and

Plastic (N) and Ceramic (J) DIPs

description

The ’ABT640 bus transceivers are designed for

asynchronous communication between data

buses. These devices transmit inverted data from

the A bus to the B bus or from the B bus to the

A bus, depending on the level at the directioncontrol

(DIR) input. The output-enable (OE) input

can be used to disable the device so that the

buses are effectively isolated.

To ensure the high-impedance state during power

up or power down, OE should be tied to VCC

through a pullup resistor; the minimum value of

the resistor is determined by the current-sinking

capability of the driver.

The SN54ABT640 is characterized for operation over the full military temperature range of –55°C to 125°C. The

SN74ABT640 is characterized for operation from –40°C to 85°C.