SN65MLVD3DRBR集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN65MLVD3DRBR属于集成电路（IC）的驱动器接收器收发器。由美国德州仪器公司制造生产的SN65MLVD3DRBR驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

FEATURES

· Low-Voltage Differential 30-W to 55-W Line

Receivers for Signaling Rates(1) up to

250Mbps; Clock Frequencies up to 125MHz

· SN65MLVD2 Type-1 Receiver Incorporates 25

mV of Input Threshold Hysteresis

· SN65MLVD3 Type-2 Receiver Provides 100

mV Offset Threshold to Detect Open-Circuit

and Idle-Bus Conditions

· Wide Receiver Input Common-Mode Voltage

Range, –1 V to 3.4 V, Allows 2 V of Ground

Noise

· Improved VIT (35 mV)

· Meets or Exceeds the M-LVDS Standard

TIA/EIA-899 for Multipoint Topology

· High Input Impedance with Low Supply

Voltage

· Bus-Pin HBM ESD Protection Exceeds 9 kV

· Packaged in 8-Pin SON (DRB) 70% Smaller

Than 8-Pin SOIC

APPLICATIONS

· Parallel Multipoint Data and Clock

Transmission via Backplanes and Cables

· Cellular Base Stations

· Central Office Switches

· Network Switches and Routers

DESCRIPTION

The SN65MLVD2 and SN65MLVD3 are single-channel M-LVDS receivers. These devices are designed in full

compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to

250 Mbps. Each receiver channel is controlled by a receive enable (RE). When RE = low, the corresponding

channel is enabled; when RE = high, the corresponding channel is disabled.

The M-LVDS standard defines two types of receivers, designated as Type-1 and Type-2. Type-1 receivers

SN65MLVD2) have thresholds centered about zero with 25 mV of hysteresis to prevent output oscillations with

loss of input; Type-2 receivers (SN65MLVD3) implement a failsafe by using an offset threshold. Receiver

outputs are slew rate controlled to reduce EMI and crosstalk effects associated with large current surges.

The devices are characterized for operation from –40°C to 85°C.