SN65MLVD3数据手册集成电路（IC）的驱动器接收器收发器规格书PDF

描述 Description

The SN65MLVD2 and SN65MLVD3 are single-channel M-LVDS receivers. These devices are designed in full compliance with the TIA/EIA-899 (M-LVDS) standard, which are optimized to operate at signaling rates up to 250 Mbps. Each receiver channel is controlled by a receive enable (RE). When RE = low, the corresponding channel is enabled; when RE = high, the corresponding channel is disabled. The M-LVDS standard defines two types of receivers, designated as Type-1 and Type-2. Type-1 receivers (SN65MLVD2) have thresholds centered about zero with 25 mV of hysteresis to prevent output oscillations with loss of input; Type-2 receivers (SN65MLVD3) implement a failsafe by using an offset threshold. Receiver outputs are slew rate controlled to reduce EMI and crosstalk effects associated with large current surges. The devices are characterized for operation from -40°C to 85°C.

特性 Features

• Low-Voltage Differential 30- Line Receivers for Signaling Rates
up to 250Mbps; Clock Frequencies up to 125MHz
• SN65MLVD2 Type-1 Receiver Incorporates 25 mV of Input Threshold Hysteresis
• SN65MLVD3 Type-2 Receiver Provides 100 mV Offset Threshold to Detect Open-Circuit and Idle-Bus Conditions
• Wide Receiver Input Common-Mode Voltage Range, -1 V to 3.4 V, Allows 2 V of Ground Noise
• Improved VIT (35 mV)
• Meets or Exceeds the M-LVDS Standard TIA/EIA-899 for Multipoint Topology
• High Input Impedance with Low Supply Voltage
• Bus-Pin HBM ESD Protection Exceeds 9 kV
• Packaged in 8-Pin SON (DRB) 70% Smaller Than 8-Pin SOIC
• APPLICATIONS
• Parallel Multipoint Data and Clock Transmission via Backplanes and Cables
• Cellular Base Stations
• Central Office Switches
• Network Switches and Routers


The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the units bps (bits per second).