SN65MLVD128DGG集成电路（IC）的信号缓冲器、中继器、分离器规格书PDF中文资料

SN65MLVD128DGG属于集成电路（IC）的信号缓冲器、中继器、分离器。由德州仪器制造生产的SN65MLVD128DGG信号缓冲器、中继器、分离器信号缓冲器、中继器和分离器系列中的产品适用于远距离电气互连或电缆系统的数字信息传输。所有实际互连系统都具有非理想特性，该系列产品主要用于解决数字信息传输过程中因此造成的模拟问题。此外，还有其他功能，例如不同物理接口样式之间的转换和多路复用。

FEATURES

· LVTTL Receiver and Eight Line Drivers

Configured as an 8-Port M-LVDS Repeater –

SN65MLVD128

· 2 LVTTL Receivers and Eight Line Drivers

Configured as Dual 4-Port M-LVDS Repeaters

– SN65MLVD129

· Drivers Meet or Exceed the M-LVDS Standard

(TIA/EIA-899)

· Low-Voltage Differential 30-W to 55-W Line

Drivers for Data Rates (1) Up to 250 Mbps or

Clock Frequencies Up to 125 MHz

· Power Up/Down Glitch Free

· Controlled Driver Output Voltage Transition

Times for Improved Signal Quality

Bus Pins High Impedance When Disabled or

VCC £ 1.5 V

Independent Enables for each Driver

Output-to-Ouput Skew tsk(o) £ 160 ps

Part-to-Part Skew tsk(pp) £ 800 ps

Single 3.3-V Voltage Supply

Bus Pin ESD Protection Exceeds 9 kV

Packaged in 48-Pin TSSOP (DGG)

APPLICATIONS

AdvancedTCA™ (ATCA™) Clock Bus Driver

Clock Distribution

Data and Clock Repeating Over Backplanes

and Cables

Cellular Base Stations

Central Office Switches

Network Switches and Routers

DESCRIPTION

The SN65MLVD128 and SN65MLVD129 are LVTTL-to-M-LVDS translators/repeaters. Outputs comply with the

M-LVDS standard (TIA/EIA-899) and are optimized for data rates up to 250 Mbps, and clock frequencies up to

125 MHz. The driver outputs have been designed to support multipoint buses presenting loads as low as 30 W

and incorporates controlled transition times for backbone operation.

M-LVDS compliant devices allow for 32 nodes on a common bus, providing a high-speed replacement for

RS-485 devices when lower common-mode voltage range and lower output signaling levels are acceptable. The

SN65MLVD128 and SN65MLVD129 provide separate driver enables, allowing for independent control of each

output signal.

Intended applications for these devices include transmission of clock signals from a central clock module, as well

as translation and buffering of data or control signals for transmission through a controlled impedance backplane

or cable.