SN65LVDS122PW集成电路（IC）的信号开关多路复用器解码器规格书PDF中文资料

SN65LVDS122PW属于集成电路（IC）的信号开关多路复用器解码器。由美国德州仪器公司制造生产的SN65LVDS122PW信号开关，多路复用器，解码器逻辑型信号开关、多路复用器和编码器 IC 可用于对以数字格式表示数据的电信号进行路由和选择。这些器件与设计用于模拟信号的类似产品有所不同，它们保留的信息表示为两个电状态之一，而不是两个外部界限内的无穷变化量。

FEATURES

· Designed for Signaling Rates (1) Up To

1.5 Gbps

· Total Jitter < 65 ps

· Pin-Compatible With SN65LVDS22 and

SN65LVDM22

· 25 mV of Receiver Input Threshold Hysteresis

Over 0-V to 4-V Common-Mode Range

· Inputs Electrically Compatible With CML,

LVPECL and LVDS Signal Levels

· Propagation Delay Times, 900 ps Maximum

· LVDT Integrates 110-W Terminating Resistor

· Offered in SOIC and TSSOP

APPLICATIONS

· 10-G (OC-192) Optical Modules

· 622-MHz Central Office Clock Distribution

· Wireless Basestations

· Low Jitter Clock Repeater/Multiplexer

· Protection Switching for Serial Backplanes

DESCRIPTION

The SN65LVDS122 and SN65LVDT122 are

crosspoint switches that use low voltage differential

signaling (LVDS) to achieve signaling rates as high

as 1.5 Gbps. They are pin-compatible speed up- grades to the SN65LVDS22 and SN65LVDM22. The

internal signal paths maintain differential signaling for

high speeds and low signal skews. These devices

have a 0-V to 4-V common-mode input range that

accepts LVDS, LVPECL, or CML inputs. Two logic

pins (S0 and S1) set the internal configuration between

the differential inputs and outputs. This allows

the flexibility to perform the following configurations:

2 x 2 crosspoint switch, 2:1 input multiplexer, 1:2

splitter or dual repeater/translator within a single

device. Additionally, SN65LVDT122 incorporates a

110-W termination resistor for those applications

where board space is a premium. Although these

devices are designed for 1.5 Gbps, some applications

at a 2-Gbps data rate can be supported depending on

loading and signal quality.

The intended application of this device is ideal for

loopback switching for diagnostic routines, fanout

buffering of clock/data distribution provide protection

in fault-tolerant systems, clock multiplexing in optical

modules, and for overall signal boosting over

extended distances.

The SN65LVDS122 and SN65LVDT122 are

characterized for operation from –40°C to 85°C.