SN65HVD62RGTRG4.A中文资料德州仪器数据手册PDF规格书

1 Features

1• Supply Ranging From 3V to 5.5V

• Independent Logic Supply of 1.6V to 5.5V

• Wide Input Dynamic Range of –15dBm to +5dBm

for Receiver

• Power Delivered by the Driver to the Coax can be

Adjusted From 0dBm to +6dBm

• AISG Compliant Output Emission Profile

• Low-power Standby Mode

• Direction Control Output for RS-485 Bus

Arbitration

• Supports up to 115 kbps Signaling

• Integrated Active Bandpass Filter with Center

Frequency at 2.176MHz

• 3mm × 3mm 16-Pin QFN Package

2 Applications

• AISG – Interface for Antenna Line Devices

• Tower Mounted Amplifiers (TMA)

• General Modem Interfaces

3 Description

These transceivers modulate and demodulate signals

between the logic (baseband) and a frequency suitable for long coaxial media.

The HVD62 is an integrated AISG transceiver designed to be compliant with Antenna Interface

Standards Group v2.0 specification.

The HVD62 receiver integrates an active bandpass filter to enable demodulation of signals even in the

presence of spurious frequency components. The

filter has a 2.176 MHz center frequency.

The transmitter supports adjustable output power

levels varying from +0dBm to +6dBm delivered to the

50 Ω coax cable. The HVD62 transmitter is compliant

with the spectrum emission requirement provided by

the AISG standard.

A direction control output is provided which facilitates

bus arbitration for an RS-485 interface. These devices integrate an oscillator input for a crystal, and

also accept standard clock inputs to the oscillator.