SN65HVD3x 3.3-V Full-Duplex RS-485 Drivers and Receivers

1 Features • 1/8 Unit-load option available (up to 256 nodes on the bus) • Bus-pin ESD protection exceeds 15-kV HBM • Optional driver output transition times for signaling rates of 1 Mbps, 5 Mbps and 26 Mbps – Line signaling rate is the number of voltage transitions made per second expresse

文件：2.11063 Mbytes 页数：46 Pages

TI

德州仪器

SN65HVD3x-EP 3.3-V Full-Duplex RS-485 Drivers And Receivers

文件：1.3225 Mbytes 页数：37 Pages

TI

德州仪器

3.3V FULL-DUPLEX RS-485 DRIVERS AND RECEIVERS

文件：1.48236 Mbytes 页数：21 Pages

TI

德州仪器

3.3V FULL-DUPLEX RS-485 DRIVERS AND RECEIVERS

文件：726.1 Kbytes 页数：25 Pages

TI

德州仪器

3.3 V FULL-DUPLEX RS-485 DRIVERS AND RECEIVERS

文件：834.93 Kbytes 页数：28 Pages

TI

德州仪器

SN65HVD3x 3.3-V Full-Duplex RS-485 Drivers and Receivers

文件：1.54664 Mbytes 页数：42 Pages

TI

德州仪器

3.3V 全双工 RS-485 驱动器和接收器

The SN65HVD3x devices are 3-state differential line drivers and differential-input line receivers that operate with 3.3-V power supply.Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for RS-422 and RS-485 data transmission over • 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus)\n• Bus-Pin ESD Protection Exceeds 15-kV HBM\n• Optional Driver Output Transition Times for Signaling Rates of 1 Mbps, 5 Mbps and 26 Mbps \n• Line Signaling Rate is the Number of Voltage Transitions Made per Second Expressed in Units of bp;

TI

德州仪器

SNx5HVD308xE Low-Power RS-485 Transceivers

1 Features • Meets or exceeds the requirements of the TIA/ EIA-485A standard • Low quiescent power – 0.3-mA Active mode – 1-nA Shutdown mode • 1/8 Unit load up to 256 nodes on a bus • Bus-pin ESD protection up to 15 kV • Industry-standard SN75176 footprint • Fail-safe receiver (bus open,

文件：1.36556 Mbytes 页数：39 Pages

TI

德州仪器

SNx5HVD308xE Low-Power RS-485 Transceivers

1 Features • Meets or exceeds the requirements of the TIA/ EIA-485A standard • Low quiescent power – 0.3-mA Active mode – 1-nA Shutdown mode • 1/8 Unit load up to 256 nodes on a bus • Bus-pin ESD protection up to 15 kV • Industry-standard SN75176 footprint • Fail-safe receiver (bus open,

文件：1.36556 Mbytes 页数：39 Pages

TI

德州仪器

丝印：NWN；Package：VSSOP；SNx5HVD308xE Low-Power RS-485 Transceivers

1 Features • Meets or exceeds the requirements of the TIA/ EIA-485A standard • Low quiescent power – 0.3-mA Active mode – 1-nA Shutdown mode • 1/8 Unit load up to 256 nodes on a bus • Bus-pin ESD protection up to 15 kV • Industry-standard SN75176 footprint • Fail-safe receiver (bus open,

文件：1.36556 Mbytes 页数：39 Pages

TI

德州仪器