SN65HVD265D.A中文资料德州仪器数据手册PDF规格书

1 Features

1• Meets the Requirements of ISO11898-2

• Turbo CAN:

– Specified for 2-Mbps CAN FD (CAN with

Flexible Data Rate)

– Short and Symmetrical Propagation Delay

Times and Fast Loop Times for Enhanced

Timing Margin

– Higher Data Rates in CAN Networks

• I/O Voltage Range Supports 3.3-V and 5-V MCUs

• Ideal Passive Behavior When Unpowered

– Bus and Logic Terminals are High Impedance

(no load)

– Power-Up/Down With Glitch Free Operation

On Bus

• Protection Features

– HBM ESD Protection Exceeds ±12 kV

– Bus Fault Protection –27 V to 40 V

– Undervoltage Protection on Supply Terminals

– Driver Dominant Time Out (TXD DTO)

– SN65HVD267: Receiver Dominant Time Out

(RXD DTO)

– SN65HVD267: FAULT Output Terminal

– Thermal Shutdown Protection

• Characterized for –40°C to 125°C Operation

2 Applications

• 2-Mbps Operation in CAN with Flexible Data Rate

Networks

• 1-Mbps Operation in Highly Loaded CAN

Networks Down to 10-kbps Networks Using TXD

DTO

• Industrial Automation, Control, Sensors and Drive

Systems

• Building, Security and Climate Control Automation

• Telecom Base Station Status and Control

• SN65HVD267: Functional Safety With Redundant

and Multi-topology CAN networks

• CAN Bus Standards Such as CANopen,

DeviceNet, NMEA2000, ARNIC825, ISO11783,

CANaerospace

3 Description

This CAN transceiver meets the ISO1189-2 High

Speed CAN (Controller Area Network) physical layer standard. It is designed for data rates in excess of 2

Mpbs (megabits per second) for CAN FD (CAN with

flexible data rate), greater than 1 Mbps for CAN in

short networks, and enhanced timing margin and

higher data rates in long and highly-loaded networks.

The device provides many protection features to enhance device and CAN-network robustness. The

SN65HVD267 adds additional features, allowing easy

design of redundant and multi-topology networks with

fault indication for higher levels of safety in the CAN

system.