SN65HVD253D集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN65HVD253D属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN65HVD253D驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1FEATURES

2• DeviceNet Compliant Supporting 64 DeviceNet

Nodes

• Loopback Function (HVD253)

• Bus-Fault Protection of –36 V to 40 V

• Power-Up/Down Glitch-Free Bus I/O

• 3.3-V Compatible Receiver Output

APPLICATIONS

• DeviceNet Networks (Vendor ID # 806)

• Industrial Automation

• HVAC Networks

• Security Systems

• Telecom Base Station Status and Control

• CANopen Data Bus

• SDS Data Bus

• CAN Kingdom Data Bus

DESCRIPTION

The SN65HVD252 and SN65HVD253 CAN transceivers meet or exceed the specifications of DeviceNet and are

compatible to the ISO 11898-2:2003 standard for use in applications employing a controller area network (CAN).

This device provides differential transmit and receive capability at signaling rates up to 1 megabit per second

(Mbps).

Designed for operation in harsh industrial environments, these devices feature bus-pin voltage protection from

–36 V to 40 V, driver output current limiting, and overtemperature driver shutdown.

Pin 8 provides for two different modes of operation: normal and silent mode. The normal mode of operation is

selected by connecting S (pin 8) to ground. If a high logic level is applied to the S pin, the device enters a

listen-only silent mode during which the driver is inactive while the receiver remains fully functional.

The Vref pin 5 of the SN65HVD252 is a VCC/2 voltage reference for systems which use split termination.

The AB pin of the SN65HVD253 implements a listen-only loopback feature which allows the local node controller

to synchronize its baud rate with that of the CAN bus. In loopback mode, the driver differential outputs are placed

in high-impedance state while the receiver bus inputs remain active. For more information on the loopback mode,

see the Application Information section.

The SN65HVD252 and SN65HVD253 are characterized for operation from –40°C to 85°C.