SN65HVD1050MDREP集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN65HVD1050MDREP属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN65HVD1050MDREP驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1FEATURES

2• Controlled Baseline

– One Assembly/Test Site, One Fabrication

Site

• Enhanced Diminishing Manufacturing Sources

(DMS) Support

• Enhanced Product-Change Notification

• Qualification Pedigree (1)

• Improved Replacement for the TJA1050

• High Electromagnetic Immunity (EMI)

• Very Low Electromagnetic Emissions (EME)

• Meets or Exceeds the Requirements of

ISO 11898-2

• Bus-Fault Protection of –27 V to 40 V

• Dominant Time-Out Function

• Thermal Shutdown Protection

• Power-Up/Down Glitch-Free Bus Inputs and

Outputs

– High Input Impedance With Low V CC

– Monotonic Outputs During Power Cycling

APPLICATIONS

• Industrial Automation

– DeviceNET™ Data Buses (Vendor ID #806)

• SAE J2284 High-Speed CAN for Automotive

Applications

• SAE J1939 Standard Data Bus Interface

• ISO 11783 Standard Data Bus Interface

• NMEA 2000 Standard Data Bus Interface

DESCRIPTION/

ORDERING INFORMATION

The SN65HVD1050 meets or exceeds the

specifications of the ISO 11898 standard for use in

applications employing a controller area network

(CAN). The device is also qualified for use in

automotive applications in accordance with

AEC-Q100.(2)

As a CAN transceiver, this device provides differential

transmit capability to the bus and differential receive

capability to a CAN controller at signaling rates up to

1 megabit per second (Mbps)(3).

Designed for operation in especially harsh

environments, the SN65HVD1050 features

cross-wire, overvoltage, and loss of ground protection from –27 V to 40 V, overtemperature protection, a

–12-V to 12-V common-mode range, and withstands

voltage transients from –200 V to 200 V, according to

ISO 7637.

Pin 8 provides for two different modes of operation:

high-speed or silent mode. The high-speed mode of

operation is selected by connecting S (pin 8) to

ground.