SN65HVD1050-EP中文资料Militart Enhanced Plastic High Speed EMC Optimized CAN Transceiver数据手册TI规格书

描述 Description

The SN65HVD1050 meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a controller area network (CAN). The device is also qualified for use in automotive applications in accordance with AEC-Q100.(2)
As a CAN transceiver, this device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps)(3).
Designed for operation in especially harsh environments, the SN65HVD1050 features cross-wire, overvoltage, and loss of ground protection from –27 V to 40 V, overtemperature protection, a –12-V to 12-V common-mode range, and withstands voltage transients from –200 V to 200 V, according to ISO 7637.
Pin 8 provides for two different modes of operation: high-speed or silent mode. The high-speed mode of operation is selected by connecting S (pin 8) to ground.
If a high logic level is applied to the S pin of the SN65HVD1050, the device enters a listen-only silent mode, during which the driver is switched off while the receiver remains fully functional.
In silent mode, all bus activity is passed by the receiver output to the local protocol controller. When data transmission is required, the local protocol controller reverses this low-current silent mode by placing a logic low on the S pin to resume full operation.
A dominant-time-out circuit in the SN65HVD1050 prevents the driver from blocking network communication with a hardware or software failure. The time-out circuit is triggered by a falling edge on TXD (pin 1). If no rising edge is seen before the time-out constant of the circuit expires, the driver is disabled. The circuit is then reset by the next rising edge on TXD.
Vref (pin 5) is available as a VCC/2 voltage reference.
The SN65HVD1050M is characterized for operation from –55°C to 125°C.

特性 Features

• Controlled Baseline
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree
• High Electromagnetic Immunity (EMI)
• Meets or Exceeds the Requirements of ISO 11898-2
• Dominant Time-Out Function
• Power-Up/Down Glitch-Free Bus Inputs and Outputs
• Monotonic Outputs During Power Cycling
• SAE J2284 High-Speed CAN for Automotive Applications
• ISO 11783 Standard Data Bus Interface
• The device is available with Q100 qualification as the SN65HVD1050Q (Product Preview).
- The signaling rate of a line is the number of voltage transitions that are made, per second, expressed in the units bps (bits per second). DeviceNET is a trademark of Open Devicenet Vendors Association, Inc.