SN65HVD10中文资料32Mbps 3.3V 半双工 RS-485 收发器数据手册TI规格书

描述 Description

The SN65HVD10, SN75HVD10, SN65HVD11, SN75HVD11, SN65HVD12, and SN75HVD12 bus transceivers combine a 3-state differential line driver and differential input line receiver that operate with a single 3.3-V power supply. They are designed for balanced transmission lines and meet or exceed ANSI standard TIA/EIA-485-A and ISO 8482:1993. These differential bus transceivers are monolithic integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. The drivers and receivers have active-high and active-low enables, respectively, that can be externally connected together to function as direction control. Very low device standby supply current can be achieved by disabling the driver and the receiver.

The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or VCC = 0. These parts feature wide positive and negative common-mode voltage ranges making them suitable for party-line applications.

特性 Features

• Operates With a 3.3-V Supply
• 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus)
• Meets or Exceeds the Requirements of ANSI TIA/EIA-485-A
• Low-Current Standby Mode: 1 µA, Typical
• Thermal Shutdown Protection
• SN75176 Footprint

The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).