SN65CML100DR集成电路（IC）的转换器电平移位器规格书PDF中文资料

SN65CML100DR属于集成电路（IC）的转换器电平移位器。由德州仪器制造生产的SN65CML100DR转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。

FEATURES

· Provides Level Translation From LVDS or

LVPECL to CML, Repeating From CML to CML

· Signaling Rates(1) up to 1.5 Gbps

· CML Compatible Output Directly Drives

Devices With 3.3-V, 2.5-V, or 1.8-V Supplies

· Total Jitter < 70 ps

· Low 100 ps (Max) Part-To-Part Skew

· Wide Common-Mode Receiver Capability

Allows Direct Coupling of Input Signals

· 25 mV of Receiver Input Threshold Hysteresis

Over 0-V to 4-V Common-Mode Range

· Propagation Delay Times, 800 ps Maximum

· 3.3-V Supply Operation

· Available in SOIC and MSOP Packages

APPLICATIONS

· Level Translation

· 622-MHz Central Office Clock Distribution

· High-Speed Network Routing

· Wireless Basestations

· Low Jitter Clock Repeater(1)

DESCRIPTION

This high-speed translator/repeater is designed for

signaling rates up to 1.5 Gbps to support various

high-speed network routing applications. The driver

output is compatible with current-mode logic (CML) levels, and directly drives 50-W or 25-W loads

connected to 1.8-V, 2.5-V, or 3.3-V nominal supplies.

The capability for direct connection to the loads may

eliminate the need for coupling capacitors. The

receiver input is compatible with LVDS (TIA/EIA-644), LVPECL, and CML signaling levels. The receiver

tolerates a wide common-mode voltage range, and

may also be directly coupled to the signal source.

The internal data path from input to output is fully

differential for low noise generation and low

pulse-width distortion.

The VBB pin is an internally generated voltage supply

to allow operation with a single-ended LVPECL input.

For single-ended LVPECL input operation, the

unused differential input is connected to VBB as a

switching reference voltage. When used, decouple

VBB with a 0.01-mF capacitor and limit the current

sourcing or sinking to 400 mA. When not used, VBB

should be left open.

This device is characterized for operation from –40°C

to 85°C.