SN65C3243DW集成电路（IC）的驱动器接收器收发器规格书PDF中文资料

SN65C3243DW属于集成电路（IC）的驱动器接收器收发器。由德州仪器制造生产的SN65C3243DW驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。

1 Features

• Operates With 3-V to 5.5-V VCC Supply

• Always-Active Noninverting Receiver Output

(ROUT2B)

• Low Standby Current: 1 μA Typical

• External Capacitors: 4 × 0.1 μF

• Accepts 5-V Logic Input With 3.3-V Supply

• Inter-Operable With SN65C3238, SN75C3238

• Supports Operation From 250 kbit/s to

1 Mbit/s

• RS-232 Bus-Pin ESD Protection Exceeds

±15 kV Using Human-Body Model (HBM)

2 Applications

• Battery-powered systems

• Personel electronics

• Notebooks

• Laptops

• Palmtop PCs

• Hand-held equipment

3 Description

The SN65C3243 and SN75C3243 consist of three

line drivers, five line receivers, and a dual chargepump

circuit with ±15-kV ESD protection pin to

pin (serial-port connection pins, including GND).

This device provides the electrical interface between

an asynchronous communication controller and the

serial-port connector. The charge pump and four small

external capacitors allow operation from a single 3-V

to 5.5-V supply. In addition, this device includes an

always-active noninverting output (ROUT2B), which

allows applications using the ring indicator to transmit

data while the device is powered down. The device

operates at data signaling rates up to 1 Mbit/s and an

increased slew-rate range of 24 V/μs to 150 V/μs.