SN55LBC173MKGD2中文资料德州仪器数据手册PDF规格书

1FEATURES

2• Meets EIA Standards RS-422-A, RS-423-A,

RS-485, and CCITT V.11

• Designed to Operate With Pulse Durations as

Short as 20 ns

• Designed for Multipoint Bus Transmission on

Long Bus Lines in Noisy Environments

• Input Sensitivity: ±200 mV

• Low-Power Consumption: 20 mA (Max)

• Open-Circuit Fail-Safe Design

DESCRIPTION

The SN55LBC173 is a monolithic quadruple differential line receiver with 3-state outputs designed to meet the

requirements of the EIA standards RS-422-A, RS-423-A, RS-485, and CCITT V.11. This device is optimized for

balanced multipoint bus transmission at data rates up to and exceeding 10 million bits per second. The four

receivers share two ORed enable inputs, one active when high, the other active when low. Each receiver

features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV

over a common-mode input voltage range of 12 V to –7 V. Fail-safe design ensures that if the inputs are open

circuited, the output is always high. The SN55LBC173 is designed using the Texas Instruments proprietary

LinBiCMOS™ technology that provides low power consumption, high switching speeds, and robustness.