SMCG75A

SURFACE MOUNT TRANSZORB??TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ♦PlasticpackagehasUnderwritersLaboratoryFlammabilityClassification94V-0 ♦Forsurfacemountedapplicationsinordertooptimizeboardspace ♦Lowprofilepackage ♦Built-instrainrelief ♦Glasspassivatedjunction ♦Lowinductance ♦1500Wpeakpulsepowercapabilitywitha

SMCG75A

SURFACE MOUNT 1500 Watt Transient Voltage Suppressor

UNIDIRECTIONALANDBIDIRECTIONALSURFACEMOUNT ThisseriesofTAZ(transientabsorptionzeners),availableinsmalloutlinesurfacemountablepackages,isdesignedtooptimizeboardspace.Packagedforusewithsurfacemounttechnologyautomatedassemblyequipment,thesepartscanbeplacedonpr

SMCG75A

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES •Lowprofilepackage •Idealforautomatedplacement •Glasspassivatedchipjunction •Availableinuni-directionalandbi-directional •Excellentclampingcapability •Veryfastresponsetime •Lowincrementalsurgeresistance •MeetsMSLlevel1,perJ-STD-020,LFmaximumpeak

SMCG75A

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES •Lowprofilepackage •Idealforautomatedplacement •Glasspassivatedchipjunction •Availableinunidirectionalandbidirectional •Excellentclampingcapability •Veryfastresponsetime •Lowincrementalsurgeresistance •MeetsMSLlevel1,perJ-STD-020,LFmaximumpeak

SMCG75A

1500W Uni-directional Transient Voltage Suppressor;

This Transient Voltage Suppressor is packaged in DO-215AA package, which has a power rating of 1500W.\n\n Available as High Reliability device per MIL-PRF-19500 indicate –HR suffix after the part number. Contact for -HR flow. Add \"PBF\" suffix for Pb-free lead finish.\n\n

SMCG75A

Surface Mount TransZorb® Transient Voltage Suppressors; Low profile package\nIdeal for automated placement\nGlass passivated chip junction;

分立

SMCG75A

1500 Watts Surface Mount Transient Voltage Suppressor

SMCG75A

UNIDIRECTIONAL AND BIDIRECTIONAL SURFACE MOUNT

SMCG75A-HR

The SMCG-HR series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events

SMCG75A-HRA

航空电子和高可靠性瞬态抑制二极管; :•针对需要更高可靠性和更低早期故障率的关键应用进行了高可靠性升级筛选。100%筛选测试分类 • 10×1000μs波形时的峰值脉冲功率为1500W，重复频率（工作循环）:0.01%• L形弯曲引线外形为高可靠性应用提供了最佳的可焊性• 可优化电路板空间的表面贴装型产品• 出色的箝位能力• 典型的故障模式是因超过指定电压或电流而造成的短路• 锡丝测试基于JEDEC JESD201A的4a和4c表进行。• IEC-61000-4-2 ESD 15kV(Air), 8kV（接触放电）。• ESD数据线路保护符合IEC 61000-4-2（IEC801-2）• EFT数据线路保护符合IEC 61000-4-4（IEC801-4） • 快速的响应时间: 从0伏特至VBR最小值通常小于1.0ps• 增量浪涌电阻较低• 标准情况下，在电压高于12V时，IR小于1μA• 内置式应力消除• 钝化玻璃芯片接点• 可保证高温焊接: 接线端260°C/10秒• 符合J-STD-020 MSL1级标准，LF最大峰值260°C• 亚光无铅镀锡• 不含卤素且符合RoHS标准• 符合IPC/ JEDEC J-STD-609A.01规定的第2级无铅互连元件• VBR @TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:温度系数，标准值为0.1%)应用: 瞬态抑制设备非常适合保护输入/输出接口、VCC总线和其他用于电信、电脑、工业和消费电子产品的易损电路。 查看库存预订样品•电气特性\n;