Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1 xVBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AA package 6. 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01 7. Fast response time:typically les

文件：866.99 Kbytes 页数：7 Pages

RUILONRUILONGYUAN ELECTRONICS

瑞隆源深圳市瑞隆源电子有限公司

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR STAND-OFF VOLTAGE - 5.0 TO 440 Volts

Stand-Off Voltage - 5.0 to 440 Volts 600 Watt Peak Pulse Power Features ● For surface mounted applications in order to optimize board space ● Low profile package ● Built-in strain relief ● Glass passivated junction ● Low inductance ● Excellent clamping capability ● Repetition Rate (duty cy

文件：447.32 Kbytes 页数：3 Pages

SPSEMI

瞬雷电子

丝印：DX；Package：DO-214AA；3.3 To 440V 600W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 600W Peak power capability at 10 × 1000μs waveform Repetition rate

文件：4.79545 Mbytes 页数：8 Pages

UNSEMI

优恩半导体

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 5.0 to 440Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

文件：294.51 Kbytes 页数：3 Pages

ZOWIE

智威

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：739.17 Kbytes 页数：7 Pages

UNSEMI

优恩半导体

600W Surface Mount Transient Voltage Suppressors

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

文件：138.32 Kbytes 页数：6 Pages

SEMITECH

海晨启半导体

丝印：AL6；Package：SMB；600 W Transient Voltage Suppressor

1. General description 600 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMB Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 600 W • Reverse standoff

文件：229.55 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

丝印：DX；Package：DO-214AA；SAMYANG ELECTRONICS

600 Watt Peak Power Dimension

文件：1.16249 Mbytes 页数：4 Pages

SAMYANG

三阳电子

Surface mount transient voltage suppressor power 600 watts

FEATURES • For surface mounted applications in order to optimize board space. • Low profile package • Glass passivated junction • Low inductance • Plastic package has Underwriters Laboratory Flammability

文件：201.22 Kbytes 页数：4 Pages

EVVOSEMI

翊欧

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typical

文件：241.73 Kbytes 页数：4 Pages

MERITEK