600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

文件：402.16 Kbytes 页数：4 Pages

LUGUANG

鲁光电子

TRANSIENT VOLTAGE SUPPRESSORS

Description • Devices for bidirectional applications • For bidirectional use C or CA suffix for types SMBJ5.0 thru types SMBJ170A (e.g. SMBJ5.0C, SMBJ170CA) • Electrical characteristics apply in both directions Features • Plastic package has Underwriters Laboratory Flammability Classification

文件：318.75 Kbytes 页数：3 Pages

SEMTECH_ELEC

先之科半导体

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 5.0 to 440Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

文件：294.51 Kbytes 页数：3 Pages

ZOWIE

智威

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typical

文件：241.73 Kbytes 页数：4 Pages

MERITEK

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.0V- 200V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O “-A” is an AEC-Q101 qualified de

文件：332.16 Kbytes 页数：5 Pages

SMCDIODE

桑德斯微电子

5V-188V 600W

FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % Excellent clamping capability Very fast response

文件：628.02 Kbytes 页数：4 Pages

UMW

友台半导体

丝印：DT；Package：DO-214AA；3.3 To 440V 600W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 600W Peak power capability at 10 × 1000μs waveform Repetition rate

文件：4.79545 Mbytes 页数：8 Pages

UNSEMI

优恩半导体

丝印：AL4；Package：SMB；600 W Transient Voltage Suppressor

1. General description 600 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMB Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 600 W • Reverse standoff

文件：229.55 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：739.17 Kbytes 页数：7 Pages

UNSEMI

优恩半导体

TRANSIENT VOLTAGE SUPPRESSOR 600 WATT PEAK POWER

DESCRIPTION The SMBJ series support both Uni and Bi direction. FEATURES  Availabl e in SM B P ackage

文件：542.75 Kbytes 页数：7 Pages

AITSEMI

创瑞科技