SMBJ5949

Silicon Zener Diode 3.0 Watt

Features •SurfaceMountApplications •3.3thru200VoltVoltageRange •IdealForHighDensity,LowProfileMounting •WithstandsLargeSurgeStresses •AvailableonTapeandReel

SMBJ5949

SILICON 1.5 WATT ZENER DIODES SURFACE MOUNT

DESCRIPTION TheSMBJ5913-5956BorSMBG5913-5956Bseriesofsurfacemount3.0wattZenersprovidesvoltageregulationinaselectionfrom3.3to200voltswithdifferenttolerancesasidentifiedbysuffixletteronthepartnumber.ThisseriesisequivalenttotheJEDECregistered1N5913thru1N5956Bw

SMBJ5949

SURFACE MOUNT SILICON ZENER DIODES

Features •SurfaceMountApplications •3.3thru200VoltVoltageRange •IdealForHighDensity,LowProfileMounting •WithstandsLargeSurgeStresses •AvailableonTapeandReel

SMBJ5949

1.5W SILICON SURFACE MOUNT ZENER DIODES

SMBJ5949B

Surface mount zener diode

FEATURES ●Completevoltagerange3.3to200V ●Withstandslargesurgestresses ●Availableontapeandreel ●Highsurgecurrentrating

SMBJ5949B

1.5 Watt Surface Mount Silicon Zener Diodes

Features •Halogenfreeavailableuponrequestbyaddingsuffix-HF •SurfaceMountApplication •3.3thru200VoltVoltageRange •LowInductance,LowProfileMounting •GlassPassivatedJunction •LeadFreeFinish/RohsCompliant(Note1)(PSuffixdesignatesCompliant.Seeorderinginfo

SMBJ5949B

Zener Diodes

VZ:3.3--200V POWERDISSIPATION:3.0W Features ◇Completevoltagerange3.3to200V ◇Withstandslargesurgestresses ◇Availableontapeandreel ◇Highsurgecurrentrating

SMBJ5949BHE3

1.5 Watt Surface Mount Silicon Zener Diodes

Features •Halogenfree •AEC-Q101Qualified •SurfaceMountApplication •10Vthru200VoltVoltageRange •LowInductance,LowProfileMounting •GlassPassivatedJunction •LeadFreeFinish/RohsCompliant(Note1)(PSuffixdesignatesCompliant.Seeorderinginformation)

SMBJ5949C

Zener Diode Single 2-Pin 100V, 2% Tolerance , 250Ohm, 2000mW SMB T/R; Surface mount equivalent to 1N5913 to 1N5956B\n Ideal for high-density and low-profile mounting\n Zener voltage available 3.3V to 200V\n Standard voltage tolerances are plus/minus 5% with B suffix and 10 % with A suffix identification\n Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively\n Options for screening in accordance with MIL-PRF-19500 for JAN, JANTX, and JANTXV are available by adding MQ, MX, or MV prefixes respectively to part numbers\n RoHS Compliant devices available by adding an “e3” suffix\n Regulates voltage over a broad operating current and temperature range\n Wide selection from 3.3 to 200 V\n Popular DO-214AA or DO-215AA packages and footprints for either high density J-bend or Gull-wing designs for visible solder joints\n Non sensitive to ESD per MIL-STD-750 Method 1020\n Withstands high surge stresses (see Figure 2)\n Moisture classification: Level 1 per IPC/JEDEC J-STD-020B with no dry pack required.;

The SMBJ5913-5956B or SMBG5913-5956B series of surface mount 2.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by suffix letter on the part number. This series is equivalent to the JEDEC registered 1N5913 thru 1N5956B with identical electrical characteristics except it is rated at 2.0 W instead of 1.5 W with the lower thermal resistance features of the surface mount packaging. It is available in J-bend design (SMBJ) with the DO 214AA package for greater PC board mounting density or in Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available as RoHS Compliant with an e3 suffix. Microchip also offers numerous other Zener products to meet higher and lower power applications.

SMBJ5949A

1.5W SILICON SURFACE MOUNT ZENER DIODES