SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Plastic Case Material has UL Flammability Classification Rating 94V-O ● Typical IR less than 1μA abov

文件：1.55911 Mbytes 页数：3 Pages

DIOTECH

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 600 Watts Peak Power FEATURES * For surface mount application 1.0ps from 0 volt to BV min. * High temperature soldering guaranteed: 260°C / 10 seconds at terminals * Typical IR less than 1mA above 10V * Fast response time: Typically less than * Built-in strain

文件：338.59 Kbytes 页数：4 Pages

BYTES

POWER 600Watts VOLTAGE 5.0 to 188 Volts

Features • Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resistance, excellent clamping capability

文件：709.25 Kbytes 页数：4 Pages

DAESAN

丝印：AE；Package：DO-214AA；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

文件：300.47 Kbytes 页数：5 Pages

SUNMATE

森美特

丝印：AE；Package：DO-214AA；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES  For surface mounted applications in order to optimize board space  Typical maximum temperature coefficient △VBR=0.1xVBR@25°C x△T  Low profile package  Built-in strain relief  Glass passivated junction  Excellent clamping capability  Repetition Rate (duty cycle):0.01  Fast

文件：706.27 Kbytes 页数：4 Pages

AOSMD

万国半导体

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：739.17 Kbytes 页数：7 Pages

UNSEMI

优恩半导体

Transil

Description The SMBJ Transil series has been designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, and MIL STD 883, method 3015, and electrical over stress according to IEC 61000-4-4 and 5. These devices are more generally used against surges below 6

文件：133.63 Kbytes 页数：10 Pages

STMICROELECTRONICS

意法半导体

600W Surface Mount Transient Voltage Suppressors

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

文件：138.32 Kbytes 页数：6 Pages

SEMITECH

海晨启半导体

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 5.0 to 440Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

文件：294.51 Kbytes 页数：3 Pages

ZOWIE

智威

600Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

文件：323.65 Kbytes 页数：3 Pages

LUGUANG

鲁光电子