丝印：CT；Package：DO-214AA；TRANSIENT VOLTAGE SUPPRESSOR

Features · For surface mounted applications in order to optimize board space · Low profile space · Very fast response time · Low inductance · Excellent clamping capability · 600W peak pulse power capability with a 10/1000 μs waveform · Meets MSL level 1, per J-STD-020 · Component in acco

文件：348.82 Kbytes 页数：4 Pages

DAESAN

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 440 Volts Peak Pulse Power - 600 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Plastic Case Material has UL Flammability Classification Rating 94V-O ● Typical IR less than 1μA abov

文件：1.55911 Mbytes 页数：3 Pages

DIOTECH

SMD Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressors- 5.0V - 440V

文件：855.62 Kbytes 页数：10 Pages

FORMOSA

美丽微半导体

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 600 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ● Fast resp

文件：116.25 Kbytes 页数：4 Pages

HY

虹扬科技

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

PEAK PULSE POWER 600 WATTS REVERSE VOLTAGE 6.8 to 520 Volts FEATURES • Glass passivated chip • 600W peak pulse power capability woth a 10/1000μs waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast respon

文件：130.24 Kbytes 页数：2 Pages

PACELEADER

霈峰

600W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260°C / 10 seconds at

文件：422.66 Kbytes 页数：4 Pages

SECOS

喜可士

TRANSIENT VOLTAGE SUPPRESSORS

Description • Devices for bidirectional applications • For bidirectional use C or CA suffix for types SMBJ5.0 thru types SMBJ170A (e.g. SMBJ5.0C, SMBJ170CA) • Electrical characteristics apply in both directions Features • Plastic package has Underwriters Laboratory Flammability Classification

文件：318.75 Kbytes 页数：3 Pages

SEMTECH_ELEC

先之科半导体

丝印：300CA；Package：DO-214AA；Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast

文件：874.38 Kbytes 页数：7 Pages

SY

顺烨电子

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 600 W FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low inductance * Response Time Typically

文件：84.78 Kbytes 页数：3 Pages

SYNSEMI

600W Surface Mount Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressor Features • Stand-off voltage from 5.0 to 170 volts • 600W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 • Fast response time: typically less than 1.0ps from 0v to VBR • Low incremental surge resistance, exc

文件：181.16 Kbytes 页数：5 Pages

TAITRON