丝印：AM7；Package：SMB；600 W Transient Voltage Suppressor

1. General description 600 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMB Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 600 W • Reverse standoff

文件：229.55 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typical

文件：241.73 Kbytes 页数：4 Pages

MERITEK

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.0V- 200V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O “-A” is an AEC-Q101 qualified de

文件：332.16 Kbytes 页数：5 Pages

SMCDIODE

桑德斯微电子

Surface Mount Transient Voltage Suppressors

Features “Pee s00W Vea 5.0V- 440 «Glass passivated chip

文件：2.78922 Mbytes 页数：6 Pages

TECHPUBLIC

台舟电子

600W Surface Mount Transient Voltage Suppressors

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

文件：138.32 Kbytes 页数：6 Pages

SEMITECH

海晨启半导体

丝印：78CA；Package：DO-214AA；Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast

文件：874.38 Kbytes 页数：7 Pages

SY

顺烨电子

GLASS PASSIVATED SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 5.0 to 440Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

文件：294.51 Kbytes 页数：3 Pages

ZOWIE

智威

600Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

文件：323.65 Kbytes 页数：3 Pages

LUGUANG

鲁光电子

600 Watts Surface Mount Transient Voltage Suppressor

Features ✧ For surface mounted application ✧ Low profile package ✧ Built-in strain relief ✧ Glass passivated junction ✧ Excellent clamping capability ✧ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ✧ Typical IR less than 1μA above 10V ✧ High temperature soldering

文件：1.00245 Mbytes 页数：6 Pages

LUGUANG

鲁光电子

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMBJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：739.17 Kbytes 页数：7 Pages

UNSEMI

优恩半导体