Surface Mount Transient Voltage Suppressors

Peak Pulse Power 600W Stand-off Voltage 5.0 to 440V Features • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resis

文件：235.12 Kbytes 页数：4 Pages

Good-Ark

固锝电子

Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Suppressors

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus and other integrated circuits. FEATURES • Stand-off Voltage Range 5.0 to 170 Volts • Uni-directional and Bi-directional • Glass passiv

文件：326.31 Kbytes 页数：5 Pages

Littelfuse

力特

Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt

Features ● For surface mount applications in order to optimize board space ● Low profile package ● Fast response time: typical less than 1.0ps from 0 volts to VBR minimum ● Low inductance ● Excellent clamping capability

文件：410.45 Kbytes 页数：5 Pages

MCC

SURFACE MOUNT TVS DIODE Electrical Characteristics, 5.0 to 30 Volts

SURFACE MOUNT TVS DIODE Electrical Characteristics, 5.0 to 30 Volts TRANSIENT VOLTAGE SUPPRESSOR DIODE Operating Teperature: -55°c to 150°c

文件：55.92 Kbytes 页数：1 Pages

RFE

RFE international

Surface Mount Transient Voltage Suppressor

Features ◇ For surface mounted application ◇ Low profile package ◇ Built-in strain relief ◇ Glass passivated junction ◇ Excellent clamping capability ◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min ◇ Typical IR less than 1uA above 10V ◇ High temperature soldering guar

文件：99.18 Kbytes 页数：4 Pages

TSC

台湾半导体

丝印：LS；Package：DO-214AA；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR DIODE

Features Glass Passivated Die Construction Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Material: UL Flammability Classification Rating 94V-0

文件：300.47 Kbytes 页数：5 Pages

SUNMATE

森美特

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● Glass passivated junction ● Low incremental surge resistance, excellent clamping capability ● Low profile package with built-in strain relief for surface mounted applications ● 600W peak pulse power capability with a 10/1000μs Wave form, repetition rate (duty cycle): 0.01 ● Ver

文件：118.53 Kbytes 页数：4 Pages

BILIN

银河微电

POWER 600Watts VOLTAGE 5.0 to 188 Volts

Features • Underwriters Laboratory recognition under UL standard for safety 497B : Isolated loop curcuit protection • Low profile package with built-in strain relief for surface mounted applications • Glass passivated junction • Low incremental surge resistance, excellent clamping capability

文件：709.25 Kbytes 页数：4 Pages

DAESAN

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE - 5.0 to 170 Volts PEAK PULSE POWER - 600 Watts FEATURES * Ideal for surface mounted applications * 400 Watts Peak Pulse Power capability on 10/1000 µs waveform * Excellent clamping capability * Low zener impedance * Fast response time * Glass passivated junction

文件：1.59829 Mbytes 页数：4 Pages

DCCOM

道全

SMD Transient Voltage Suppressor

600W Surface Mount Transient Voltage Suppressors- 5.0V - 440V

文件：855.62 Kbytes 页数：10 Pages

FORMOSA

美丽微半导体