SMBG7.0电路保护的TVS-二极管规格书PDF中文资料

DESCRIPTION

This SMBJ5.0-170A or SMBG5.0-170A series of surface mount 600 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components from destruction or degradation. It is available in J-bend design (SMBJ) with the DO-214AA package for greater PC board mounting density or in a Gull-wing design (SMBG) in the DO-215AA for visible solder connections. It is also available in both unidirectional and bidirectional configurations with a C or CA suffix part number as well as RoHS Compliant with an e3 suffix. Their response time is virtually instantaneous. As a result, they can be used for protection from ESD or EFT per IEC61000-4-2 and IEC61000-4-4, or for inductive switching environments and induced RF protection. They can also protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein. Microsemi also offers numerous other TVS products to meet higher and lower power demands and special applications.

FEATURES

• Available in both unidirectional and bidirectional

construction (add C or CA suffix for bidirectional)

• Selections for 5.0 to 170 volts standoff voltages (VWM)

• Optional 100 screening for avionics grade is available

by adding MA prefix to part number for 100 temperature

cycle -55oC to +125oC (10X) as well as surge (3X) and 24

hours HTRB with post test VZ & IR (in operating direction

for unidirectional or both directions for bidirectional)

• Options for screening in accordance with MIL-PRF-19500

for JANTX are available by adding MX prefix to the part

number.

• Axial-lead equivalent packages for thru-hole mounting

available as P6KE6.8 to P6KE200CA (consult factory for

other surface mount options)

• Moisture classification is Level 1 with no dry pack required

per IPC/JEDEC J-STD-020B

• RoHS compliant devices available by adding an “e3” suffix

APPLICATIONS / BENEFITS

• Economical surface mount design in both J-bend or Gull-wing terminations

• Protects sensitive components such as IC’s, CMOS, Bipolar, BiCMOS, ECL, DTL, T2L, etc.

• Protection from switching transients & induced RF

• Compliant to IEC61000-4-2 and IEC61000-4-4 for ESD and EFT protection respectively

• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:

Class 1: SMB 5.0 to SMB 120A or CA

Class 2: SMB 5.0 to SMB 60A or CA

Class 3: SMB 5.0 to SMB 30A or CA

• Class 4: SMB 5.0 to SMB 15A or CA

• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:

Class 1: SMB 5.0 to SMB 36A or CA

• Class 2: SMB 5.0 to SMB 18A or CA