SURFACE MOUNT TRANSIENT VOLTAGE RECTIFIERS

FEATURES : 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical I R less then 1mA above 10V

文件：1.67044 Mbytes 页数：3 Pages

TAYCHIPST

泰迪斯电子

丝印：AVT；Package：DO-214AC；400W Surface Mount Transient Voltage Suppressors

Features Glass passivated or planar junction Excellent clamping capability Repetition rate (duty cycle): 0.01 Low profile package and low inductance 400W Peak Pulse power capability at 10×1000μs waveform Fast response time: typically less than 1.0ps from 0V to VBR min High temperature solde

文件：3.2336 Mbytes 页数：7 Pages

UNSEMI

优恩半导体

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

文件：506.53 Kbytes 页数：9 Pages

YAGEO

国巨

丝印：MAV；Package：DO-214AC；400W Transient Voltage Suppressor (TVS) protection device

Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtual

文件：489.87 Kbytes 页数：6 Pages

MICROSEMI

美高森美

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

文件：542.78 Kbytes 页数：9 Pages

YAGEO

国巨

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

文件：165.97 Kbytes 页数：4 Pages

MCC

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

[Byte] FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 se

文件：336.59 Kbytes 页数：4 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

文件：121.07 Kbytes 页数：4 Pages

HY

虹扬科技

400W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

文件：455.88 Kbytes 页数：4 Pages

SECOS

喜可士

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

文件：342.32 Kbytes 页数：4 Pages

UNIOHM

厚声