Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：735.55 Kbytes 页数：7 Pages

UNSEMI

优恩半导体

丝印：ZM；Package：DO-214AC；Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

文件：2.13025 Mbytes 页数：6 Pages

SAMYANG

三阳电子

Transient Voltage Suppressor Diodes

Features For surface mounted applications in order to optimize board space. Low profile package Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability

文件：285.48 Kbytes 页数：4 Pages

EVVOSEMI

翊欧

丝印：ZMT；Package：DO-214AC；400W Surface Mount Transient Voltage Suppressors

Features Glass passivated or planar junction Excellent clamping capability Repetition rate (duty cycle): 0.01 Low profile package and low inductance 400W Peak Pulse power capability at 10×1000μs waveform Fast response time: typically less than 1.0ps from 0V to VBR min High temperature solde

文件：3.2336 Mbytes 页数：7 Pages

UNSEMI

优恩半导体

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

文件：506.53 Kbytes 页数：9 Pages

YAGEO

国巨

丝印：MZM；Package：DO-214AC；400W Transient Voltage Suppressor (TVS) protection device

Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtual

文件：489.87 Kbytes 页数：6 Pages

Microsemi

美高森美

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

文件：87.04 Kbytes 页数：5 Pages

VishayVishay Siliconix

威世威世科技公司

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

文件：542.78 Kbytes 页数：9 Pages

YAGEO

国巨

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

文件：165.97 Kbytes 页数：4 Pages

MCC

丝印：MZL；Package：DO-214AC；400W Transient Voltage Suppressor (TVS) protection device

Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtual

文件：489.87 Kbytes 页数：6 Pages

Microsemi

美高森美