5.0V-188V 400W

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V) • Excellent clamping

文件：783.17 Kbytes 页数：4 Pages

UMW

友台半导体

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi direction. FEATURES ⚫ Availabl e in SM A P ackage

文件：322.68 Kbytes 页数：7 Pages

AITSEMI

创瑞科技

丝印：RM；Package：DO-214AC；Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

文件：2.13025 Mbytes 页数：6 Pages

SAMYANG

三阳电子

SURFACE MOUNT TRANSIENT VOLTAGE RECTIFIERS

FEATURES : 400W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) Typical I R less then 1mA above 10V

文件：1.67044 Mbytes 页数：3 Pages

TAYCHIPST

泰迪斯电子

丝印：RMT；Package：DO-214AC；400W Surface Mount Transient Voltage Suppressors

Features Glass passivated or planar junction Excellent clamping capability Repetition rate (duty cycle): 0.01 Low profile package and low inductance 400W Peak Pulse power capability at 10×1000μs waveform Fast response time: typically less than 1.0ps from 0V to VBR min High temperature solde

文件：3.2336 Mbytes 页数：7 Pages

UNSEMI

优恩半导体

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

文件：506.53 Kbytes 页数：9 Pages

YAGEO

国巨

丝印：MRM；Package：DO-214AC；400W Transient Voltage Suppressor (TVS) protection device

Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtual

文件：489.87 Kbytes 页数：6 Pages

MICROSEMI

美高森美

Transient Voltage Suppressors (TVS)

Features ■ For surface mounted applications in order to optimize board space ■ Low profile package ■ Glass passivated junction ■ Low inductance ■ Excellent clamping capability ■ 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% ■ Fast response

文件：542.78 Kbytes 页数：9 Pages

YAGEO

国巨

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

文件：165.97 Kbytes 页数：4 Pages

MCC

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 5.0 to 170 Volts 400 Watts Peak Power FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High te

文件：336.59 Kbytes 页数：4 Pages

BYTES