400W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

文件：455.88 Kbytes 页数：4 Pages

SECOS

喜可士

丝印：ZF；Package：DO-214AC；Transient Voltage Suppressors

Features Glass passivated chip 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time RoHS compliant

文件：2.51019 Mbytes 页数：4 Pages

LUGUANG

鲁光电子

丝印：ZG；Package：DO-214AC；3.3 To 440V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 400W Peak power capability at 10 × 1000μs waveform Repetition rate (d

文件：3.95758 Mbytes 页数：8 Pages

UNSEMI

优恩半导体

丝印：BJ4；Package：SMA；400 W Transient Voltage Suppressor

1. General description 400 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMA Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 400 W • Reverse standoff

文件：217.72 Kbytes 页数：12 Pages

NEXPERIA

安世

Excellent clamping capability

Features ● Peak power dissipation 400W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

文件：234.38 Kbytes 页数：6 Pages

SEMITECH

海晨启半导体

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：735.55 Kbytes 页数：7 Pages

UNSEMI

优恩半导体

Transient Voltage Suppressors

FEATURES ✧ For surface mounted applications in order to optimize board space. ✧ Low profile package. ✧ Built-in strain relief. ✧ Glass passivated junction. ✧ Low inductance. ✧ Excellent clamping capability. ✧ Repetition Rate (duty cycle): 0.01. ✧ Fast response time: typically less than 1.0

文件：284.61 Kbytes 页数：4 Pages

MERITEK

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi direction. FEATURES ⚫ Availabl e in SM A P ackage

文件：322.68 Kbytes 页数：7 Pages

AITSEMI

创瑞科技

丝印：ZG；Package：DO-214AC；Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

文件：2.13025 Mbytes 页数：6 Pages

SAMYANG

三阳电子

Transient Voltage Suppressor Diodes

Features For surface mounted applications in order to optimize board space. Low profile package Glass passivated junction Low inductance Plastic package has Underwriters Laboratory Flammability

文件：285.48 Kbytes 页数：4 Pages

EVVOSEMI

翊欧