SMAJ Series 400W Transient Voltage Suppressor

DESCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. iodes FEATURES: Glass passivated or planar Excellent clamping capabili

文件：1.34292 Mbytes 页数：7 Pages

LEIDITECH

雷卯电子

Surface Mount Transient Voltage Suppressors (TVS)

Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：735.55 Kbytes 页数：7 Pages

UNSEMI

优恩半导体

Excellent clamping capability

Features ● Peak power dissipation 400W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD 30KV(Ai

文件：234.38 Kbytes 页数：6 Pages

SEMITECH

海晨启半导体

丝印：YW；Package：DO-214AC；Transient Voltage Suppressors

Features Glass passivated chip 400 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 Low leakage Uni and Bidirectional unit Excellent clamping capability Very fast response time RoHS compliant

文件：2.51019 Mbytes 页数：4 Pages

LUGUANG

鲁光电子

丝印：YX；Package：DO-214AC；3.3 To 440V 400W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 1μA above 10V 400W Peak power capability at 10 × 1000μs waveform Repetition rate (d

文件：3.95758 Mbytes 页数：8 Pages

UNSEMI

优恩半导体

丝印：BH9；Package：SMA；400 W Transient Voltage Suppressor

1. General description 400 W uni- and bi-directional Transient Voltage Suppressor (TVS) in a SMA Surface-Mounted Device (SMD) plastic package, designed for transient voltage protection. 2. Features and benefits • Rated peak pulse power at 10/1000 μs waveform: PPPM = 400 W • Reverse standoff

文件：217.72 Kbytes 页数：12 Pages

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

Transient Voltage Suppressors

FEATURES ✧ For surface mounted applications in order to optimize board space. ✧ Low profile package. ✧ Built-in strain relief. ✧ Glass passivated junction. ✧ Low inductance. ✧ Excellent clamping capability. ✧ Repetition Rate (duty cycle): 0.01. ✧ Fast response time: typically less than 1.0

文件：284.61 Kbytes 页数：4 Pages

MERITEK

丝印：VX；Package：SMA；SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 400W Peak Pulse Power Dissipation 5.0V- 300V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O ROHS Compliant All SMC Parts ar

文件：325.49 Kbytes 页数：5 Pages

SMCDIODE

桑德斯微电子

TRANSIENT VOLTAGE SUPPRESSOR 400 WATT PEAK POWER

DESCRIPTION The SMAJ series support both Uni and Bi direction. FEATURES ⚫ Availabl e in SM A P ackage

文件：322.68 Kbytes 页数：7 Pages

AITSEMI

创瑞科技

丝印：YX；Package：DO-214AC；Surface Mount Transient Voltage Suppressors

Features Excellent clamping capability Low leakage current Low capacitance High surge capability Glass passivated chip Epoxy resin package Built-in strain relief Will not fatigue RoHS Compliant Fast response time: typically less than 1.0ps from 0 Volts to VBR min Applications Teleco

文件：2.13025 Mbytes 页数：6 Pages

SAMYANG

三阳电子