SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand - Off Voltage - 5.0 to 170 Volts Peak Pulse Power - 400 Watt FEATURES ● Glass Passivated Die Construction ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

文件：1.76506 Mbytes 页数：3 Pages

DIOTECH

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

[Byte] FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 se

文件：336.59 Kbytes 页数：4 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

SMD Transient Voltage Suppressor

400W Surface Mount Transient Voltage Suppressors- 5.0V- 440V FEATURES • 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle) : 0.01. • Low profile surface mounted applications in order to optimize board space. • Excellent clamping capability • Low increment

文件：864.98 Kbytes 页数：10 Pages

FORMOSA

美丽微半导体

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

文件：121.07 Kbytes 页数：4 Pages

HY

虹扬科技

SMAJ Series 400W Transient Voltage Suppressor

DESCRIPTION: TVS diodes can be used in a wide range of applications which like consumer electronic products, automotive industries, munitions, telecommunications, aerospace industries, and intelligent control systems. iodes FEATURES: Glass passivated or planar Excellent clamping capabili

文件：1.34292 Mbytes 页数：7 Pages

LEIDITECH

雷卯电子

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

WORKING VOLTAGE:5.0 to 440V PEAK PULSE POWER:400W FEATURES • Glass passivated chip • 400W peak pulse power capability woth a 10/1000μ s waveform, repetitive rate (duty cycle):0.01 • Low leakage • Uni and Bidirectional unit • Excellent clamping capability • Very fast response time

文件：122.55 Kbytes 页数：2 Pages

PACELEADER

霈峰

400W Peak Power Surface Mount TVS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

文件：455.88 Kbytes 页数：4 Pages

SECOS

喜可士

丝印：43CA；Package：DO-214AC；Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast response time Typical

文件：873.39 Kbytes 页数：7 Pages

SY

顺烨电子

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 400 W FEATURES : * 400W surge capability at 1ms * Optimized for LAN protection applications * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typica

文件：247.76 Kbytes 页数：3 Pages

SYNSEMI

400W Surface Mount Transient Voltage Suppressor

Features ● Stand-off voltage from 5.0 to 170 volts ● 400W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 ● Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) ● Ideal for EFT protection of data lines in accordance wi

文件：160.39 Kbytes 页数：6 Pages

TAITRON