丝印：MVT；Package：DO-214AC；400W Transient Voltage Suppressor (TVS) protection device

Description and applications This device has the ability to clamp dangerous high voltage, short term transients such as produced by directed or radiated electrostatic discharge phenomena before entering sensitive component regions of a circuit design. Response time of clamping action is virtual

文件：489.87 Kbytes 页数：6 Pages

MICROSEMI

美高森美

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts

400 Watt Transient Voltage Suppressors 5.0 to 440 Volts Features • For Surface Mount Applications • Unidirectional And Bidirectional • Low Inductance • High Temp Soldering: 260°C for 10 Seconds At Terminals • For Bidirectional Devices Add “C” To The Suffix of The Part Number: i

文件：165.97 Kbytes 页数：4 Pages

MCC

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES ● Plastic package has underwriters laboratory flammability classification 94V-0 ● Optimized for LAN protection applications ● Low profile package with built-in strain relief for surface mounted applications ● Low incremental surge resistance, excellent clamping capability ● 400W peak

文件：114.53 Kbytes 页数：4 Pages

BILIN

银河微电

POWER 400WATTS VOLTAGE 5.0 TO 188 VOLTS

Features • Plastic package has Underwriters Laboratory flammability classification 94V-0 • Optimized for LAN protection applications • Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) • Ideal for EFT protection of data lines in accordance with IEC 1000-4-4

文件：369.3 Kbytes 页数：4 Pages

DAESAN

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES: * 400W peak pulse power capability with a 10/1000μjs waveform * Optimized for LAN protection applications * Low clamping * Very fast response time * Pb/RoHSFree

文件：324.57 Kbytes 页数：4 Pages

NJSEMINew Jersey Semi-Conductor Products, Inc.

新泽西半导体新泽西半导体公司

400Watts Surface Mount Transient Voltage Suppressor

Features ◇ For surface mounted application ◇ Low profile package ◇ Built-in strain relief ◇ Glass passivated junction ◇ Excellent clamping capability ◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR less than 1µA above 10V ◇ High temperatu

文件：364.87 Kbytes 页数：4 Pages

LUGUANG

鲁光电子

TRANSIENT VOLTAGE SUPPRESSORS

Features ● For surface mounted applications in order to optimize board space ● Low profile space ● Glass passivated chip ● Low inductance ● Excellent clamping capability ● Very fast response time ● Typical ID less than 1µA at VWM ● 400 W peak pulse power capability with a 10/1000 µs wavefo

文件：1.88905 Mbytes 页数：4 Pages

JUXING

广东钜兴电子

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

文件：117.14 Kbytes 页数：6 Pages

VISHAYVishay Siliconix

威世威世科技公司

Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

文件：100.36 Kbytes 页数：6 Pages

VISHAYVishay Siliconix

威世威世科技公司

Surface Mount TRANSZORB Transient Voltage Suppressors

FEATURES • Low profile package • Ideal for automated placement • Glass passivated chip junction • Available in uni-directional and bi-directional • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 (300 W above 78 V) • Excellent clamping capabi

文件：100.36 Kbytes 页数：6 Pages

VISHAYVishay Siliconix

威世威世科技公司