SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

[Byte] FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1mA above 10V * High temperature soldering guaranteed: 260 °C / 10 se

文件：336.59 Kbytes 页数：4 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 400 Watts FEATURES ● Rating to 200V VBR ● For surface mounted applications ● Reliable low cost construction utilizing molded plastic technique ● Plastic material has UL recognition 94V-0 ● Typical IR less than 1µA above 10V ●

文件：121.07 Kbytes 页数：4 Pages

HY

虹扬科技

Transient Voltage Suppressors

PRODUCT SUMMARY Stand-off Voltage ratings from 5.0V to 440V Peak pulse power 400W in SMA surface-mount package FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Optimized for LAN protection applications • Ideal for ESD protection

文件：632.58 Kbytes 页数：4 Pages

SSC

Silicon Standard Corp.

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage: 5.0-170 Volts Peak pulse power: 300 Watts FEATURE ◇ Optimzed for LAN protection applications ◇ Ideal for ESD protection of data lines in accordance with IEC 1000-4-2(IEC801-2) ◇ Ideal for EFT protection of data lines in accordance with IEC1000-4-4(IEC801-2) ◇ Plasti

文件：439.66 Kbytes 页数：4 Pages

SY

顺烨电子

丝印：16A；Package：DO-214AC；Transient Voltage Suppressors (TVS) Data Sheet

Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01% Fast response time Typical

文件：873.39 Kbytes 页数：7 Pages

SY

顺烨电子

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V Peak Pulse Power : 400 W FEATURES : * 400W surge capability at 1ms * Optimized for LAN protection applications * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typica

文件：247.76 Kbytes 页数：3 Pages

SYNSEMI

400W Surface Mount Transient Voltage Suppressor

Features ● Stand-off voltage from 5.0 to 170 volts ● 400W Peak Pulse Power capability on 10/1000 µs waveform repetition rate(duty cycle): 0.01 ● Ideal for ESD protection of data lines in accordance with IEC 1000-4-2 (IEC801-2) ● Ideal for EFT protection of data lines in accordance wi

文件：160.39 Kbytes 页数：6 Pages

TAITRON

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS

FEATURES * For surface mount application * Built-in strain relief * Excellent clamping capability * Low profile package * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds at

文件：342.32 Kbytes 页数：4 Pages

UNIOHMUniohm

台湾厚声

SURFACE MOUNT TRANSIERT VOLTAGE SUPPRESSOR

Features ● Low profile package ● Ideal for automated placement ● Glass passivated chip junction ● High forward surge capability ● Available in uni-directional 400 W peak pulse power capability with a 10/1000 μs waveform ● Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

文件：1.51111 Mbytes 页数：4 Pages

YANGJIE

扬杰电子

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE RANGE 5.0 to 170 Volts CURRENT 300 Watts Peak Power FEATURE * For surface mounted applications * Low profile package * Built-in strain relief * Glass passivated junction * Excellent clamping capability * Fast response time: typically less than 1.0ps from 0 volts to BV min. * Ty

文件：313.11 Kbytes 页数：4 Pages

JGD

固锝电子