Dual J-K Flip-Flop with Set and Reset

The SL74HC112 is identical in pinout to the LS/ALS112. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. Each flip-flop is negative-edge clocked and has active-low asynchronous Set and Reset inputs. ● Outputs Directly

文件：49.05 Kbytes 页数：6 Pages

SLS

Triple 3-Input AND Gate

The SL74HC11 is identical in pinout to the LS/ALS11. The device inputs are comp atible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. ● Outputs Directly Interface to CMOS, NMOS, and TTL ● Operating Voltage Range: 2.0 to 6.0 V ● Low Input Current:

文件：34.31 Kbytes 页数：4 Pages

SLS

Triple 3-Input AND Gate

The SL74HC11 is identical in pinout to the LS/ALS11. The device inputs are comp atible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. ● Outputs Directly Interface to CMOS, NMOS, and TTL ● Operating Voltage Range: 2.0 to 6.0 V ● Low Input Current:

文件：34.31 Kbytes 页数：4 Pages

SLS

Dual Retriggerable Monostable Multivibrator

Dual Retriggerable Monostable Multivibrator The SL74HC123 is identical in pinout to the LS/ALS123. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. There are two trigger inputs, A INPUT (negative edge) and B INPUT (po

文件：59.89 Kbytes 页数：6 Pages

SLS

Dual Retriggerable Monostable Multivibrator

Dual Retriggerable Monostable Multivibrator The SL74HC123 is identical in pinout to the LS/ALS123. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. There are two trigger inputs, A INPUT (negative edge) and B INPUT (po

文件：59.89 Kbytes 页数：6 Pages

SLS

Dual Retriggerable Monostable Multivibrator

Dual Retriggerable Monostable Multivibrator The SL74HC123 is identical in pinout to the LS/ALS123. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. There are two trigger inputs, A INPUT (negative edge) and B INPUT (po

文件：59.89 Kbytes 页数：6 Pages

SLS

Quad 3-State Noninverting Buffers

Quad 3-State Noninverting Buffers High-Performance Silicon-Gate CMOS The SL74HC125 is identical in pinout to the LS/ALS125. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The SL74HC125 noninverting buffers are desig

文件：45.37 Kbytes 页数：5 Pages

SLS

Quad 3-State Noninverting Buffers

Quad 3-State Noninverting Buffers High-Performance Silicon-Gate CMOS The SL74HC125 is identical in pinout to the LS/ALS125. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The SL74HC125 noninverting buffers are desig

文件：45.37 Kbytes 页数：5 Pages

SLS

Quad 3-State Noninverting Buffers

Quad 3-State Noninverting Buffers High-Performance Silicon-Gate CMOS The SL74HC125 is identical in pinout to the LS/ALS125. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The SL74HC125 noninverting buffers are desig

文件：45.37 Kbytes 页数：5 Pages

SLS

Quad 2-Input NAND Gate

Quad 2-Input NAND Gate with Schmitt-Trigger Inputs High-Performance Silicon-Gate CMOS The SL74HC132 is identical in pinout to the LS/ALS132. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. The SL74HC132 can be used

文件：60.54 Kbytes 页数：4 Pages

SLS