SL2FCS5101EV/DH中文资料恩XP数据手册PDF规格书

General description

The I•CODE SLI-L/I•CODE SLI-L HC IC is a dedicated chip for smart label applications

with the need for a leaner custom-specific command set, smaller memory and/or a

product which takes care of the increasing demand for perfect customer privacy. This IC is

another member of our product family of smart label ICs that fully comply to the ISO

standard ISO/IEC 15693. The IC is also available in high capacitance version for small

label designs.

The I•CODE system offers the possibility of operating more than one label simultaneously

in the field of the reader antenna (Anticollision). It is designed for long range applications

with a special command for the use under the European regulations.

1.1 Anticollision

An intelligent anticollision function allows to operate more than one tag in the field

simultaneously. The anticollision algorithm selects each tag individually and ensures that

the execution of a transaction with a selected tag is performed correctly without data

corruption resulting from other tags in the field.

1.2 Contactless energy and data transfer

Whenever connected to a very simple and cheap type of antenna (as a result of the

13.56 MHz carrier frequency) made out of a few windings printed, winded, etched or

punched coil the I•CODE SLI-L/I•CODE SLI-L HC IC can be operated without line of sight

up to a distance of 1.5 m (gate width). No battery is needed. When the smart label is

positioned in the field of an interrogator antenna, the high speed RF communication

interface allows to transmit data with up to 53 kbit/s.

1.3 Security and privacy aspects

1. Unique Identifier (UID)

The UID can not be altered and guarantees the uniqueness of each label.

2. Password protected Label Destroy

With the 32-bit destroy password an addressed label can be destroyed with the

Destroy command. That status is irreversible and the label will never respond to any

command again.

3. Password protected Privacy Mode

With the 32-bit Privacy password a label can be set to the Privacy mode with the Set

to Privacy Mode command. In that mode the label will not respond to any command

except of the command Get Random Number till it receives again the right Privacy

password. That mode is especially designed to meet the increasing demand to take

care of the customers privacy.

4. Password protected EAS Functionality

With the 32-bit EAS password the addressed label can be set in a mode that the

commands Set EAS and Reset EAS are only executed by the label if the right EAS

password is transmitted to the label within the mentioned commands.

2.1 I•CODE SLI-L RF interface

- Contactless transmission of data and supply energy (no battery needed)

- Operating distance: up to 1.5 m (depending on antenna geometry)

- Operating frequency: 13.56 MHz (ISM, world-wide licence free available)

- I•CODE SLI- L Functionality (ISO/IEC 15693)

- Fast data transfer: up to 53 kbit/s

- High data integrity: 16-bit CRC, framing

- True anti-collision

- Additional fast anti-collision read

- Password protected Electronic Article Surveillance (EAS) incl. application selection

- Application Family Identifier (AFI) supported

- Data Storage Format Identifier (DSFID)

- Privacy command with 32-bit Privacy password

- Destroy command with 32-bit Destroy password

- Long Range Command

- Write distance equal to read distance

2.2 EEPROM

- Data retention of 10 years

- Write endurance 100.000 cycles

2.3 Security features

- Unique identifier for each device

- Lock mechanism for each user memory block (write protection)

- Lock mechanism for DSFID, AFI, EAS

- Password (32-bit) protected Label Destroy

- Password (32-bit) protected Privacy Mode

- Password (32-bit) protected EAS Functionality

Applications

- Factory Automation

- Industrial and Laundry

- Asset Management

- Libraries and Rental