SKY77621-51中文资料Multimode Multiband Power Amplifier Module数据手册Skyworks规格书

描述 Description

Skyworks SKY77621-51 is a hybrid multimode multiband (MMMB) Power Amplifier Module (PAM) that supports 2.5G/3G/4G handsets, and operates efficiently in GSM, EGPRS, EDGE, WCDMA, TD-SCDMA, and LTE modes. The module is fully programmable through a Mobile Industry Processor Interface (MIPI).
The PAM consists of a GSM850/EGSM900 PA block, a DCS1800/PCS1900 PA block, a WCDMA/LTE block for low and high bands, and a Multi-Function Control (MFC) block, RF input/output ports internally matched to 50 \u001E to reduce the number of external components. A CMOS integrated circuit, using standard MIPI control, provides the internal MFC interface and operation. Extremely low leakage current maximizes handset standby time.
The InGaP die and the silicon die and passive components are mounted on a multi-layer laminate substrate. The assembly is encapsulated in a 5 x 7 x 0.9 mm, 42-pad MCM, SMT package which allows for a highly manufacturable, low cost solution.
2.5G The SKY77621-51 supports the GSM850, EGSM900, DCS1800, and PCS1900 bands as well as 2.5G Class12 Enhanced General Packet Radio Service (EGPRS) multi-slot operation and EDGE linear modulation.
In GMSK mode, adjusting VRAMP controls power output. In EDGE mode, PIN controls power output and VRAMP sets the bias.
3G The SKY77621-51 supports WCDMA, High-Speed Downlink Packet Access (HSDPA), High Speed Uplink Packet Access (HSUPA), High Speed Packet Access (HSPA+), and TD-SCDMA modulations. Varying the input power level provides output power control. VCC is adjusted using a DCDC converter or Envelope Tracking (ET) modulator to maximize efficiency for each power level and modulation type.
4G The SKY77621-51 supports 1.4, 3, 5, 10, 15, 20 MHz channel bandwidths. Similar to 3G operation, output power is controlled by varying the input power and VCC is adjusted using a DCDC converter or ET modulator to maximize efficiency for each power level.
3G/4G Modulation scheme includes:WCDMA Voice Release 99HSDPA categoriesHSUPAHSPA+TD-SCDMALTE 1.4, 3, 5, 10, 15, 20 MHz Channel BWTDD-LTE

特性 Features

·Hybrid PA architecture
·Two 2G/2.5G outputs
·Eight 3G/4G outputs
·Industry-leading PAE for 2G/3G/4G
·Optimized for Envelope Tracking (ET) application
·Supports APT DCDC operation
·Fully programmable Mobile Industry Processor Interface (MIPI) control
·MIPI programmable bias modes optimize best efficiency/linearity trade-off for 3G and 4G; minimizes DG09 for 3G.
·Analog VRAMP for 2G/2.5G controls GMSK power output and sets EDGE bias
·Small, low profile package: 5 mm x 7 mm x 0.9 mm, 42-pad configuration