SKY65367-11数据手册RF/IF射频/中频RFID的射频前端（LNA+PA）规格书PDF

描述 Description

Please note: SKY65367-11 is being discontinued and is not recommended for new designs. The SKY65367-11 is a high performance, transmit/receive (T/R) Front-End Module (FEM). The device includes a Power Amplifier (PA) capable of more than +29 dBm of transmit output power (VCC = 3.6 V) at more than 50 percent PAE for the module (60 percent for the standalone PA). For current-sensitive applications, the PA can be bypassed to save battery current.

All functionality can be controlled by a three-wire interface. The FEM can be placed in a deep “sleep” mode, drawing less than 1 μA of current.

The receive chain consists of a low-loss Single-Pole, Triple-Throw (SP3T) switch, which provides an insertion loss of approximately 0.5 dB. Three separate VCC pins enable maximum RF isolation.

The SKY65367-11 is packaged in a 16-pin, 4 x 4 mm Multi-Chip Module (MCM), which allows for a highly manufacturable low-cost solution.Reference Design(s):Texas Instruments: CC1120 / CC1125

特性 Features

• Transmit output power: >+27.5 dBm
• High efficiency PA
• Receive loss: <0.5 dB
• Transmit bypass mode with 0.5 dB insertion loss
• Sleep mode current: < 1 μA
• Integrated control logic
• Small footprint MCM (16-pin, 4 x 4 mm) package (MSL3, 260 °C per JEDEC J-STD-020)

应用 Application

• Connected Homes

简介

SKY65367-11属于RF/IF射频/中频RFID的射频前端（LNA+PA）。由制造生产的SKY65367-11射频前端（LNA + PA）本系列中的产品是各种集成电路，其中集成了射频 (RF) 信号链连接到系统天线的部分中常见的一种或多种功能，如低噪声放大器 (LNA) 和可编程放大器 (PA)。任何给定器件所含的实际功能各不相同，相比旨在提供更高应用灵活性的器件，针对相对较窄应用的器件通常集成更大一部分必要的信号链。