3-phase Converter-Inverter-Brake (CIB)

Features* • Optimized design for superior thermal performance • Low inductive design • Solder contact technology • 1200V Generation 7 IGBT (T7) • Robust and soft switching CAL4F diode technology • PEP rectifier diode technology for enhanced power and environmental robustness • Integrate

文件：923.7 Kbytes 页数：10 Pages

SEMIKRON

赛米控丹佛斯

Quint Differential Line Receiver

Description The SK10/100E116 is a quint differential line receiver designed for use in new, high-performance ECL systems. Features • Extended 100E VEE Range of –4.2V to –5.5V • 400 ps Maximum Propagation Delay • Extended VEE Range of –4.2V to –5.5V • VBB Output for Single-Ended Reception •

文件：113.7 Kbytes 页数：4 Pages

SEMTECH

先之科

4-bit D Flip-Flop

Description The SK10/100E131 is a Quad master-slave D-type flip-flop with differential outputs. Each flip-flop may be clocked separately by holding Common Clock (CC) LOW and using the Clock Enable (CE*) inputs for clocking. Common clocking is achieved by holding the CE inputs LOW and using CC to

文件：113.97 Kbytes 页数：4 Pages

SEMTECH

先之科

6-bit D register

Description The SK10/100E151 offers 6 edge-triggered, high-speed, master-slave D-type flip-flops with differential outputs, designed for use in new high-performance ECL systems. Features • 1100 MHz Toggle Frequency • Extended 100E VEE Range of –4.2V to –5.5V • Differential Outputs • Asynchro

文件：116.59 Kbytes 页数：5 Pages

SEMTECH

先之科

4-bit serial / parallel converter

Description The SK10/100E445 is an integrated 4-bit serial-toparallel data converter. The device is designed to operate for NRZ data rates of up to 2.0 Gb/s. The chip generates a divide by 4 and a divide by 8 clock for both 4-bit conversion and a two chip 8-bit conversion function. The conversion

文件：171.67 Kbytes 页数：8 Pages

SEMTECH

先之科

4-input OR / NOR

Description The SK10/100EL01W is a 4-input OR / NOR gate device. This device is fully compatible with MC10/100EL01 and MC10/100LVEL01. With output transition and propagation delay much faster than the E101, the EL01W is ideally suited for those applications which require ultimate AC performance.

文件：108.06 Kbytes 页数：4 Pages

SEMTECH

先之科

2-Input XOR/XNOR

Description The SK10/100EL07 is a 2-Input XOR / XNOR gate. This device is fully compatible with MC10/100EL07. With propagation delay and output transition time significantly faster than the E107, the EL07 is ideally suited for those applications which require the ultimate in AC performance. Feat

文件：110.37 Kbytes 页数：4 Pages

SEMTECH

先之科

1:2 Differential Fanout Buffer

Description The SK10/100EL11W is a differential 1:2 fanout buffer. This device is fully compatible with MC10/100EL11 and MC100LVEL11. With output transition time much faster than the E111, the EL11W is ideally suited for those applications which require ultimate AC performance. Features • Exten

文件：131.28 Kbytes 页数：6 Pages

SEMTECH

先之科

Low Impedance Driver

Description The SK10/100EL12W is a low impedance driver buffer. With two pairs of OR/NOR outputs, the device is ideally suited for high drive applications such as memory addressing. The SK10/100EL12W is fully compatible with MC10/100EL12 and MC10/100LVEL12. With significantly fast propagation de

文件：119.09 Kbytes 页数：5 Pages

SEMTECH

先之科

1:5 Clock DISTRIBUTION CHIP

Description The SK10/100EL14W is a 1:5 Clock Distribution Chip designed specifically for low skew clock distribution applications. This device is fully compatible with MC100EL14 and MC100LVEL14. Features • Extended Supply Voltage Range: (VEE = –5.5V to –3.0V, VCC = 0V) or (VCC = + 3.0V to +5.5V

文件：93.3 Kbytes 页数：4 Pages

SEMTECH

先之科