Si8931 and Si8932 Isolated Analog Amplifier

Features • 0 to 2.5 V nominal input voltage • Low signal delay: 1 μs • Typical input offset: 0.16 mV • Typical gain error: ±0.06 • Excellent drift specifications - 0.75 μV/°C offset drift - 6 ppm/°C typical gain drift • Typical nonlinearity: 0.01 • Typical SNR: 76 dB • High common-mode t

文件：1.66778 Mbytes 页数：30 Pages

SKYWORKS

思佳讯

Automotive Isolated Voltage Sensor

Si8932B-AS devices are galvanically isolated analog amplifiers. The single-ended input has a 0 to 2.25 volt specified input range which is ideal for measuring high voltage through a resistor divider or for any place where a sensor must be isolated from the control system. The output is a single-ende

Skyworks

思佳讯

Si8931 and Si8932 Isolated Analog Amplifier

Features • 0 to 2.5 V nominal input voltage • Low signal delay: 1 μs • Typical input offset: 0.16 mV • Typical gain error: ±0.06 • Excellent drift specifications - 0.75 μV/°C offset drift - 6 ppm/°C typical gain drift • Typical nonlinearity: 0.01 • Typical SNR: 76 dB • High common-mode t

文件：1.66778 Mbytes 页数：30 Pages

SKYWORKS

思佳讯

VOICE-COIL MOTOR DRIVER

VOICE-COIL MOTOR DRIVER Providing control and drive of the voice-coil motor used for head positioning in 5 V disk drive applications, the second-generation A8932CLWA is a full-bridge driver that can be configured so that its output current is a direct function of an externally applied control vol

文件：164.86 Kbytes 页数：8 Pages

ALLEGRO

VOICE-COIL MOTOR DRIVER

VOICE-COIL MOTOR DRIVER Providing control and drive of the voice-coil motor used for head positioning in 5 V disk drive applications, the second-generation A8932CLWA is a full-bridge driver that can be configured so that its output current is a direct function of an externally applied control vol

文件：164.86 Kbytes 页数：8 Pages

ALLEGRO

DRV8932 Quad Half-Bridge Driver With Integrated Current Sense

文件：2.66629 Mbytes 页数：40 Pages

TI

德州仪器