SI21812-B60RF/IF射频/中频RFID的RF解调器规格书PDF中文资料

SI21812-B60属于RF/IF射频/中频RFID的RF解调器。由美国思佳讯公司制造生产的SI21812-B60RF 解调器RF 解调器是设计用于从调制波中提取信号的器件，调制波则是通过使用频率、幅度、相位、放大器或位移器而改变的波。

描述 Description

The Si21812 integrates two separate high-performance digital

demodulators for the Japanese and South American terrestrial

ISDB-T standard and for the DVB-T, DVB-C, DVB-S2/S and DVBS2X

standards into a single compact package. Leveraging

Skyworks' proven digital demodulation architecture, the Si21812

achieves excellent reception performance for each media while

significantly minimizing front-end design complexity, cost, and

power dissipation. Connecting the Si21812 to both a dual

terrestrial/cable TV tuner, and a dual satellite tuner, results in a

high-performance and cost optimized TV front-end solution.

Leveraging significant field experience in DVB terrestrial

demodulation (DVB-T2/T), the Si21812 dual demodulator can

accept standard or low-IF inputs (differential) and complies with

the Brazilian SBTVD-T terrestrial specifications (ABNT NBR

16.601 and 15.604). Main fes.

The satellite reception allows demodulating widespread DVB-S,

DIRECTV™ (DSS), DVB-S2, DIRatures include fast channel scan,

very short lock times, state of the art CCI performance, partial

reception, and auxiliary channels decoding.

The DVB-T and DVB-C, including ITU-T J.83 annex B,

demodulators are enhanced versions of proven and broadly used

Si2164/67/68/69 Skyworks devices.

The satellite reception allows demodulating widespread DVB-S,

DIRECTV™ (DSS), DVB-S2, DIRECTV™ (AMC) legacy

standards, and new Part II of DVB-S2 (S2X) satellite broadcast

standard. A zero-IF interface (differential) allows for a seamless

connection to market proven satellite silicon tuners. It also

integrates two DiSEqC™ 2.0 LNB interfaces for satellite dish

control and, for each satellite demodulator, an equalizer to

compensate for echoes in long cable feeds from the LNB to the

satellite tuner RF input.

The Si21812 offers an on-chip blind scanning algorithm for DVBS/

S2/S2X and DVB-C standards, as well as blind lock function.

The Si21812 embeds two independent programmable transport

stream interfaces which provide a flexible range of output modes,

including a cross-bar functionality, and are fully compatible with all

MPEG decoders or conditional access modules to support any

customer application.

特性 Features

- Pin-to-pin compatible with all dual demodulator family: Si216x2

and Si218x2

- API compatible with all single and all dual demodulators

- ISDB-T (ABNT NBR 16.601 and 15.604)

- 6, 7, and 8 MHz bandwidth

- Partial reception supported

- AC1 and AC2 decoding

- DVB-T (ETSI EN 300 744)

- NorDig Unified 2.5, D-Book 8 compliant

- DVB-C (ETSI EN 300 429) / ITU-T J.83 Annex A/B/C

- 1 to 7.2 MSymbol/s, C-Book compliant

- DVB-S2 (ETSI EN 302 307-1 V1.4.1)

- QPSK/8PSK demodulator

- DVB-S2X (ETSI EN302 307-2 V1.1.1)

- QPSK/8PSK, 8/16/32APSK demodulator

- Roll-off factors from 0.05 to 0.35

- Channel bonding for TS transmission supported

- DVB-S (ETSI EN 300 421) and DSS supported

- Dual DiSEqC™ 2.x interface, Unicable support

- 1 to 45 MSps for all satellite standards

(<40 MSps in 32APSK)

- I2C serial bus interfaces (master and host)

- Upgradeable with firmware patch download via fast SPI or I2C

(broadcast mode supported)

- Dual independent differential IF input for T/C tuners and differential

ZIF I/Q inputs for satellite tuners

- GPIOs and multi-purpose ports (two per demodulator)

- Separate flexible TS interfaces with serial or parallel

outputs and cross-bar feature

- Fast lock times for all standards

- Only two power supplies: 1.2 and 3.3 V

- 8x8 mm, QFN-68 pin package, Pb-free/RoHS compliant