SGM7300A中文资料3.3V, Differential 2-Channel, 2:1 Multiplexer/Demultiplexer Switch数据手册SGMICRO规格书

描述 Description

The SGM7300A is a differential 2-channel switch which can be used for both multiplexer (MUX) and demultiplexer (DEMUX) configurations. The device can be used for PCI Express Generation 3, USB 3.1 and other high-speed serial interface applications. 
The product can switch dual differential signals to 1 of 2 locations. The SGM7300A minimizes the impedance of the switch so that the attenuation observed through the switch can be ignored and minimizes the inter-channel skew and inter-channel crosstalk required for high-speed serial interfaces. The SGM7300A can achieve extremely low power consumption by extending existing high-speed ports. In order to achieve high ESD tolerance, the ESD protection circuits are integrated into ICs. 
The SGM7300A optimizes the pins to match the product to different application layouts. It is suitable for edge connectors with different signal sources on the motherboard, with input and output pins on opposite sides of the package. When SGM7300A is in power-off state, all I/O pins’ impedance is 20kΩ. When VDD is powered on, the ports that switched off are low impedance, approximately 4Ω, the two port ends that switched on are approximately 13kΩ. 
No external DC blocking capacitors are required on the RF paths as long as no external DC voltage is applied, which can save PCB area and cost. 
The SGM7300A is available in a Green TLGA-2.5×4.5 -20L package.

特性 Features

• High Bandwidth: 9GHz
• Support 10Gbps Signal Transmission
• Support USB 3.1 Gen1 and Gen2 Data Rates
• Low Insertion Loss:
• -0.33dB at 0.1GHz
• -0.85dB at 4.0GHz

应用 Application

USB 3.1
PCI Express Generation 3
DisplayPort 1.2
SATA 6Gbit/s
High-Speed Differential Signals Routing