SGM722Q中文资料Automotive, 11MHz, Rail-to-Rail I/O CMOS Operational Amplifier数据手册SGMICRO规格书

描述 Description

The SGM722Q is a dual, low voltage, low noise and low power operational amplifier for automotive applications. This device can operate from 2.1V to 5.5V single supply, and consumes low quiescent current. 
The SGM722Q features a ±6.5mV maximum input offset voltage. The minimum input common mode voltage is within 0.1V below the negative rail, and the output swing is rail-to-rail with heavy loads. It exhibits a high gain-bandwidth product of 11MHz and a slew rate of 7V/μs. These specifications make the operational amplifier appropriate for various applications. 
The device is AEC-Q100 qualified (Automotive Electronics Council (AEC) standard Q100 Grade 1) and it is suitable for automotive applications. 
The SGM722Q is available in Green SOIC-8 and MSOP-8 packages. It operates over an ambient temperature range of -40℃ to +125℃.

特性 Features

• AEC-Q100 Qualified for Automotive Applications Device Temperature Grade 1
TA = -40℃ to +125℃
• Input Offset Voltage: ±6.5mV (MAX)
• High Gain-Bandwidth Product: 11MHz
• High Slew Rate: 7V/μs
• Settling Time to 0.1% with 2V Step: 0.4μs
• Overload Recovery Time: 0.5μs
• Low Noise: 8.5nV/√Hz at 10kHz
• Rail-to-Rail Input and Output
• Supply Voltage Range: 2.1V to 5.5V
• Input Voltage Range: -0.1V to 5.6V with VS = 5.5V
• Low Quiescent Current: 1.2mA/Amplifier (TYP)
• Available in Green SOIC-8 and MSOP-8 Packages

应用 Application

AEC-Q100 Grade 1 Applications
Sensors
Audio
Active Filters
A/D Converters
Communications
Test Equipment
Cellular and Cordless Phones
Laptops and PDAs
Photodiode Amplification
Battery-Powered Instrumentation