SGM42609数据手册SGMICRO中文资料规格书

描述 Description

The SGM42609 is a motor driver device with one integrated H-bridge that can run one DC brush motor solenoid or other inductive load. It can be used in a variety of applications such as toothbrushes and battery-powered toys.
The H-bridge consists of four N-MOSFETs to drive the motor windings. The SGM42609 can supply up to 2A peak or 1.5A RMS output current (with proper heatsinking at VCC = 5V and TA = +25℃). At lower VCC voltages, the current capability is decreased slightly.
Internal protection functions are provided for over-current protection (OCP), power supply under-voltage lockout (UVLO), charge pump under-voltage lockout (CPUV) and over-temperature protection (OTP). Fault conditions are indicated by the nFAULT pin.
Sleep mode allows saving power when the device is not driving the motor. The SGM42609 will enter into sleep mode when IN1 and IN2 are low for more than tsleep.
The SGM42609 is available in Green MSOP-10 and TDFN-3×3-10L packages. It operates over an ambient temperature range of -40℃ to +125℃.

特性 Features

• Power Supply Voltage Range: 2.7V to 24V

• Single H-Bridge Motor Driver

• Drives One DC Brush Motor

• Low On-Resistance (0.48Ω for HS + LS)

• 1.5A RMS Output Current

• 2A Peak Current at VCC = 5V, TA = +25℃

• Active Low Fault Indication Pin (nFAULT)

• Available in Green MSOP-10 and TDFN-3×3-10L Packages

应用 Application

Cameras
Robotics
Toothbrushes
Gaming Machines
Battery-Powered Toys
Office Automation Machines